<

Distribution Racks

Cable Management

Distribution Racks
CableTies

Raceway Systems
Vertical Rings
Rack Mount Rear Cable Management Bar
Metal Ring Panels
Metal Interbay Panels
Extended Cable Management Bracket
Clip Panels
Cable Management Ring Panels
Cable Management Panel Covers
Cable Management Interbay Panels
Cable Management Finger Duct Panels
Blank Panels

Connectors

D-Sub Connectors

Ladder Rack Accessories

Ladder Rack Systems

Rack Accessories

Rack Screws
Pilot Point Rack Screws
Grounding Kit
Distribution Rack Hardware Replacement Package

Racks and Cable Channel

Trays and Shelves

Wall Mount Racks and Brackets
Wall Mount Racks
Vertical Hinged Wall Mount Brackets
Swing Gate Racks
Hinged Wall Mount Brackets

Related Items
Ladder Rack
Vertical Rings
Rack Mount Rear Cable Management Bar
Metal Ring Panels
Metal Interbay Panels
Extended Cable Management Bracket
Clip Panels
Cable Management Ring Panels
Cable Management Panel Covers
Cable Management Interbay Panels
Cable Management Finger Duct Panels
Blank Panels

Rack Accessories
Rack Screws
Pilot Point Rack Screws
Grounding Kit
Distribution Rack Hardware Replacement Package

Racks and Cable Channel
Cable Channel
19 Inch Distribution Racks
19 Inch Cable Management Racks

Trays and Shelves

Wall Mount Racks and Brackets
Wall Mount Racks
Vertical Hinged Wall Mount Brackets
Swing Gate Racks
Hinged Wall Mount Brackets

About Us
cable, vdsl, patch

 

Distribution Racks-ICC Distribution Racks

ICC Distribution Racks-Distribution Racks- 3 Foot Distribution Rack- 4 Foot Distribution Rack- 6 Foot Distribution Rack- 7 Foot Distribution Rack

American Tech Supplies supplies Distribution Racks equipped with 2 pairs of 19" sliding vertical extrusions, one pair of side panels with lock, tinted glass front door with swivel handle lock, adjustable feet, rear panel with module for cable entry, GND/earthing kit, and 28 mounting kits Distribution Racks EIA standard 19" racks are designed for the ultimate in configuration flexibility. The 6061-t6 high-strength aluminum alloy makes ICC racks lightweight and durable with excellent grounding characteristics. Available in black powder coated aluminum and natural aluminum.

Distribution Racks- 4 Post Racks Below

In an effort to modernize its computer leaning centers, Lompoc Unified School District, located in Lompoc California, choose ICC distribution racks as its connectivity supplier for its high speed data networks. The intent was to link the computer rooms, for 16 high schools, to accommodate and serve roughly 12,000 students year round. The network comprises roughly 25 computers per lab connected through a central hub via a frame relay. Some locations were designed to use a fiber optic backbone, with future plans to expand this to all 16 schools

Raceway Systems

Voice and data communications play a critical role in today's office environments. Since this type of communication is normally sent over copper or optical fiber mediums, it is important to have a reliable source for quality and affordable voice and data connectivity products.

ICCMSCCVBK

3 ft. Aluminum Black Dist. Cover


These high quality, black powder coated aluminum Distribution Rack racks are easy to install and use. Includes 3/8-16 bolts and washers and #12 rack screws for assembly

ICCMSR1936

3 ft. Aluminum Distribution Rack 17 RMS, Black
ICCMSR1948

4 ft. 24 RMS,Distribution Rack Black
ICCMSR1972 6 ft. 38 RMS, Black
ICCMSR1984 7 ft. 45 RMS, Black

ICCMSA19363- Foot- 7 Foot Distribution Rack

ICCMSA1936

3 ft. 17 RMS, Aluminum Distribution Rack
ICCMSA1948-Aluminum polished racks offer maximum installation flexibility. Includes 3/8-16 bolts and washers and #12 rack screws for assembl

4 ft. 24 RMS, Aluminum-
Distribution Rack
ICCMSA1972 6 ft. 38 RMS, Aluminum
ICCMSA1984 7 ft. 45 RMS, Aluminum

Part Number

Product
Description
Price
ICCMSR1936 3 ft. 17 RMS, Black

ICCMSR1948 4 ft. 24 RMS, Black

ICCMSR1972 6 ft. 38 RMS, Black

ICCMSR1984 7 ft. 45 RMS, Black

19” Distribution Rack, Black.These high quality, black powder coated aluminum racks are easy to install and use. Includes 3/8-16 bolts and washers and #12 rack screws for assembly.
Call
ICCMSA1936 3 ft. 17 RMS, Aluminum

ICCMSA1948 4 ft. 24 RMS, Aluminum

ICCMSA1972 6 ft. 38 RMS, Aluminum

ICCMSA1984 7 ft. 45 RMS, Aluminum

19” Distribution Rack, Aluminum - Polished-Aluminum polished racks offer maximum installation flexibility. Includes 3/8-16 bolts and washers and #12 rack screws for assembly.
Call
ICACSS01BK #12 Screw, Black, 30 pcs./bag

ICACSS01SV #12 Screw, 30 pcs./bag

#12-24 x 5/8 inch pilot point rack screws are for use on distribution racks only.
Call

ICCMSCC3BK 3 ft., Aluminum Black

ICCMSCC3SV 3 ft., Aluminum Polished


Vertical Cable Channel-Channel fits between distribution racks and can be mounted back to back and on top of each other.
Call

ICCMSCCVBK 3 ft., Aluminum Black

Cover is designed to fit on the front of the cable channel to provide a neat, clean and well-organized appearance.
Call

 

             
  Miracel 19" Distribution Rack-Lab Rack NO 19      
 
Miracel Network Racks
and Accessories (PDF, 1.0 MB
)
 
 

■ with fixed 19" built-in unit on the front
■ for built-in units in accordance with IEC 297 3
■ flexible assembly of the built-in units using T slots

For the installation of
■ 19" components on the front
■ equipment with maximum width of 450 mm
■ installation accessories

Jumpering compartment
■ front 123 mm

Load rating
■ 5000 N static

Tests
■ earthing according to VDE 0100 part 540
■ vibration test according to MIL-STD 810 E

Material / Finish
■ basic rack, extruded aluminium, polished
■ corner piece die-cast aluminium
■ multifunctional frames and 19" angular extrusions sheet steel, zinc-plated

Supply schedule
1 basic unit
2 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5
2 multifunctional frames for cable clamping and universal assembly options
4 levelling feet (0-25 mm)

How supplied
■ assembled

Please note
For the installation of chassis runners and 19" shelves, additional 19"- are required at the rear.
Rack Suites

To create a rack suite, per connection you require a set of suite connectors BN 1.130.935.7



 
 
Miracel NO19 (Width 600mm) with T-slot profile Order Number
nominal depth chassis depth installation height installation height nominal height weight  
T [mm] t [mm] h [U] h [mm] H [mm] [kg]  
600
435
23 1052 1200 14 01.135.793.3
37 1652 1800 16 01.135.795.3
41 1852 2000 17 01.135.796.3
46 2052 2200 18 01.135.797.3
700
435
23 1052 1200 15 01.135.799.3
37 1652 1800 17 01.135.801.3
41 1852 2000 18 01.135.802.3
         
800
635
23 1052 1200 16 01.135.817.3
37 1652 1800 18 01.135.819.3
41 1852 2000 19 01.135.820.3
46 2052 2200 20 01.135.821.3
900
735
37 1652 1800 19 01.135.842.0
41 1852 2000 20 01.135.843.0
46 2052 2200 21 01.135.844.0
 
     
             
  Miracel 19" Distribution Rack – Network Rack NS 26      
 
Miracel Network Racks
and Accessories (PDF, 1.0 MB)
 

With fixed 19" installation on the front and rear for components in accordance with IEC 297-3
■ Installation of chassis runners and 19" shelves possible
■ Cable entry via bottom and top cover
■ Door opening angle, 180°

Variants
Type 1
■ single rack (with side panels)
Type 2
■ rack for rack suite (without side panels)

For the installation of
■ 19" components on the front and rear
■ equipment with maximum width of 450 mm
■ installation accessories

Jumpering compartment
■ front 123 mm

Load rating
■ 5000 N static

Degree of protection
IP 20 (upgradeble to IP 55)

Tests
■ Earthing in accordance with VDE 0100 T 540
■ IP Test in accordance with DIN 40 050 / IEC 529
■ Earthing in accordance with VDE 0100 T 540
■ IP Test in accordance with DIN 40 050 / IEC 529

Material / Finish
■ basis rack, extruded aluminium, polished
■ corner pieces, die-cast aluminium, polished
■ cover zinc-plated sheet steel, powder-coated textured
■ doors, sheet steel, ,powder-coated structure, glass infill front door, single security-glass panel, 4 mm
■ multifunctional members an 19"-extrusions sheet steel, zinc-plated

Colour
Final digit of order number .1:
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7035 light grey
Final digit of order number .8:
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7021 black grey

Supply schedule

Type 1
1 Basic rack 1 19" Vertical extrusions, sheet steel with mounting holes 2 Multifunctional struts for cable clamping and universal mounting options 2 Side panels with quick connectors 1 Cover with integrated cable entry 1 Front door, single, single safety glass panel, with handle and mounting for cylinder lock 1 Rear door, single, sheet steel, with handle and mounting for cylinder lock 1 Earth set, complete ( VDE 0100 ) 4 Levelling feet
Type 2
1 Basic rack 4 19" Vertical extrusions, sheet steel with mounting holes 2 Multifunctional struts for cable clamping and universal mounting options 1 Cover with integrated cable entry 1 Front door, single, single safety glass panel, with handle and mounting for cylinder lock 1 Rear door, single, sheet steel, with handle and mounting for cylinder lock 1 Earth set, complete ( VDE 0100 ) 4 Levelling feet
How supplied
■ assembled



 

 
 
Miracel NS26 (Width 800) Order Number
type
width height depth height installation height useable depth weight  
[mm] [mm] [mm] [U] h [mm] t [mm] [kg]  
with side panels
800 2000 600 41 1900 365 108 01.136.274.X
8700 2000 800 41 1900 565 116 01.136.280.X
800 2200 800 46 2100 565 126 01.136.281.X
800 2000 900 41 1900 665 120 01.136.286.X
800 2200 900 46 2100 665 130 01.136.287.X
without side panels
800 2000 600 41 1900 365 99 01.136.300.X
800 2000 800 41 1900 565 105 01.136.306.X
800 2000 900 41 1900 665 115 01.136.312.X

Replace X with the digit representing your colour choice

.1 = RAL 9011 / RAL 7035
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7035 light grey

.8 = RAL 9011 / RAL 7021
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7021 black grey
 

 

Miracel 19" Distribution Rack

             
  Miracel 19" Distribution Rack NS 19.8, single winged      
 
Miracel Network Racks
and Accessories (PDF, 1.0 MB
 

■ with fixed 19" built-in unit on the front
■ for built-in units in accordance with IEC 297 3
■ flexible assembly of the built-in units using T slots
■ cable entry via plinth and cover
■ heat loss discharge via ventilation dome
■ door opening angle 180°

Variants
Type 1
■ single rack (with side panels)
Type 2
■ rack for rack suite (without side panels)

For the installation of
■ 19" components on the front
■ equipment with maximum width of 450 mm
■ installation accessories

Jumpering compartment
■ front 123 mm

Load rating
■ 5000 N static

Degree of protection
Type 1
■ IP 40 (upgradeble to IP 55)

Tests
■ earthing according to VDE 0100 P 540
■ vibration test according to MIL-STD 810 E
■ IP test according to DIN 40 050 / IEC 529

Material / Finish
■ Basic rack, aluminium extrusion, polished
■ Corner piece, die-cast aluminium, polished
■ Covers, sheet steel, zinc passivated, powder-caoted, textured
■ Doors, sheet steel, powder-coated, textured, glass infill, front door, single safety glass panel, 4 mm
■ Multifunctional struts and 19" extrusions, sheet steel, zinc passivated

Colour
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7035 light grey

Supply schedule
Type 1
1 Basic unit
2 19" aluminium vertical extrusion with T slot and increment slide for spring nut M5
2 Multifunctional frame for cable clamping and universal assembly options
1 Cover with ventilation dome and integrated cable entry
1 Front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 Rear door, single-winged, sheet steel, with handle and fixing for locking cylinders
2 Side panels with quick locking
1 Plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 lateral plinth trim, closed
2 Plinth trim for front and rear, with airing vents and fixing for filter mat
1 Complete earthing test (VDE 0100)
Type 2
1 Basic unit
2 19" aluminium vertical extrusion with T slot and increment slide for spring nut M5
2 Multifunctional frame for cable clamping and universal assembly options
1 Cover with ventilation dome and integrated cable entry
1 Front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 Rear door, single-winged, sheet steel, with handle and fixing for locking cylinders
1 Plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 Plinth trim for front and rear, with airing vents and fixing for filter mat
1 Complete earthing test (VDE 0100)

How supplied
■ assembled

Please note
For the installation of chassis runners and 19" shelves, additional 19"- are required at the rear. (in the Miracel 19" distribution rack NS 25 as standard).
Rack Suites

To create a rack series with the rack number, you require:
(n-1) racks without side panels
1 rack with side panels
In a rack suite, per connection you require a set of suite connectors BN 1.130.935.7




 
 
Miracel NS19.8 (Width 800mm) with a single-winged glass door Order Number
type
nominal depth chassis depth installation height   nominal height weight  
T [mm] t [mm] h [U] h [mm] H [mm] [kg]  
with side panels
600 435 23 1052 1320 78 01.135.001.1
37 1652 1920 103 01.135.003.1
41 1852 2120 112 01.135.004.1
46 2052 2320 121 01.135.005.1
800 635 23 1052 1320 80 01.135.019.1
37 1652 1920 111 01.135.021.1
41 1852 2120 120 01.135.022.1
46 2052 2320 129 01.135.023.1
without side panels
600 435 23 1052 1320 70 01.135.007.1
37 1652 1920 95 01.135.009.1
41 1852 2120 103 01.135.010.1
46 2052 2320 112 01.135.011.1
800 635 23 1052 1320 73 01.135.025.1
37 1652 1920 101 01.135.027.1
41 1852 2120 109 01.135.028.1
46 2052 2320 118 01.135.029.1
 
     

 

             
  Miracel 19" Distribution Rack – Network Rack NS 25      
 
Miracel Network Racks
and Accessories (PDF, 1.0 MB
)

■ installation of chassis runners and 19" shelves possible
■ with fixed 19" built-in unit on the front and rear
■ for built-in units in accordance with IEC 297 3
■ flexible assembly of the built-in units using T slots
■ cable entry via plinth and cover
■ heat loss discharge via ventilation dome
■ door opening angle 180°

Variants
Type 1
■ single rack (with side panels)
Type 2
■ rack for rack suite (without side panels)

For the installation of
■ 19" components on the front and rear
■ equipment with maximum width of 450 mm
■ installation accessories

Jumpering compartment
■ front 123 mm

Load rating
■ 5000 N static

Degree of protection
IP 40 (upgradeble to IP 55)

Tests
■ earthing according to VDE 0100 P 540
■ vibration test according to MIL-STD 810 E
■ IP test according to DIN 40 050 / IEC 529

Material / Finish
■ basis rack, extruded aluminium, polished
■ corner pieces, die-cast aluminium, polished
■ cover zinc-plated sheet steel, powder-coated textured
■ doors, sheet steel, ,powder-coated structure, glass infill front door, single security-glass panel, 4 mm
■ multifunctional members an 19"-extrusions sheet steel, zinc-plated

Colour
Final digit of order number .1:
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7035 light grey
Final digit of order number .8:
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 70321 black grey

Supply schedule
type 1
1 basic unit
4 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5
2 multifunctional frame for cable clamping and universal assembly options
1 cover with ventilation dome and integrated cable entry
1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 rear doors, sheet steel, with handle and fixing for locking cylinders
2 side panels with quick locking
1 plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 lateral plinth trim, closed
2 plinth trims for front and rear, with airing vents and fixing for filter mat
1 complete earthing test (VDE 0100)
type 2
1 basic unit
4 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5
2 multifunctional frame for cable clamping and universal assembly options
1 cover with ventilation dome and integrated cable entry
1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 rear doors, sheet steel, with handle and fixing for locking cylinders
1 plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 plinth trims for front and rear, with airing vents and fixing for filter mat
1 complete earthing test (VDE 0100)

How supplied
■ assembled

Please note
Rack suites
To create a rack series with the rack number n, you require:
(n-1) racks without side panels
1 rack with side panels
In a rack suite, per connection you require a set of suite connectors BN 01.130.935.7




 
 
Miracel NS25 (Width 800mm) Order Number
type
nominal depth chassis depth installation height nominal height weight  
T [mm] t [mm] h [U] h [mm] H [mm] [kg]  
with side panels
600 365 41 1852 2120 112 01.136.044.1
41 1852 2120 112 01.136.044.8
800 565 41 1852 2120 120 01.136.050.1
41 1852 2120 120 01.136.050.8
46 2052 2320 130 01.136.051.1
46 2052 2320 130 01.136.051.8
900 665 41 1852 2120 124 01.136.056.1
41 1852 2120 124 01.136.056.8
46 2052 2320 134 01.136.057.1
46 2052 2320 134 01.136.057.8
1000 740 41 1852 2120 140 01.127.970.1
41 1852 2120 140 01.127.970.8
without side panels
600 365 41 1852 2120

103

01.136.244.1
         
800 565 41 1852 2120 109 01.136.250.1
41 1852 2120 109 01.136.250.8
900 665 41 1852 2120 118 01.136.256.1
41 1852 2120 118 01.136.256.8
1000 740 41 1852 2120 128 01.127.975.1
41 1852 2120 128 01.127.975.8
 

Miracel 19" Network Equipment Rack NG 800

Miracel Network Racks
and Accessories (PDF, 1.0 MB
)
 

cable entry via plinth and cover
■ heat loss discharge via ventilation dome
■ door opening angle 180°

Variants
Type 1
■ single rack (with side panels)
Type 2
■ rack for rack suite (without side panels)

For the installation of
■ equipment with maximum width of 735 mm
■ shelves
■ installation accessories

Load rating
■ 5000 N static

Degree of protection
Type 1
■ IP 40 (upgradeble to IP 55)

Tests
■ earthing according to VDE 0100 P 540
■ vibration test according to MIL-STD 810 E
■ IP test according to DIN 40 050 / IEC 529

Material / Finish
■ basic rack, extruded aluminium, polished
■ corner pieces, die-cast aluminium, polished
■ covers zinc-plated sheet steel, powder-coated textured
■ doors, sheet steel, powder-coated structure, glass infill front door, single security-glass panel, 4 mm
■ multifunctional members and 19"-extrusions sheet steel, zinc-plated

Colour
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7035 light grey

Supply schedule
Type 1
1 basic unit
2 multifunctional frame for cable clamping and universal assembly options
1 cover with ventilation dome and integrated cable entry
1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 rear door, single-winged, sheet steel, with handle and fixing for locking cylinders
2 side panels with quick locking
1 plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 lateral plinth trim, closed
2 plinth trims for front and rear, with airing vents and fixing for filter mat
1 complete earthing test (VDE 0100)
Type 2
1 basic unit
2 multifunctional frame for cable clamping and universal assembly options
1 cover with ventilation dome and integrated cable entry
1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 rear door, single-winged, sheet steel, with handle and fixing for locking cylinders
1 plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 plinth trims for front and rear, with airing vents and fixing for filter mat
1 complete earthing test (VDE 0100)

How supplied
■ assembled

Rack Suites
To create a rack series with the rack number n, you require:
(n-1) racks without side panels
1 rack with side panels
In a rack suite, per connection you require a set of suite connectors BN 01.130.935.



Miracel NG800 (Width 800mm) with glass door, single-winged Order Number
type
nominal depth height weight  
T [mm] t1 [mm] H [U] H [mm] h [mm] [kg]  
with side panels
800 730 23 1320 1052 77 01.135.649.1
37 1920 1652 107 01.135.651.1
41 2120 1852 115 01.135.652.1
46 2320 2052 124 01.135.653.1
without side panels
800 730 23 1320 1052 70 01.135.655.1
37 1920 1652 97 01.135.657.1
41 2120 1852 104 01.135.658.1
46 2320 2052 113 01.135.659.1

--

 

Home | Cables | Switches | Contact Us | Our Team | Locations