<

Highline OSP Products

FIBER FUSION MARKET & Fusion Splicer Analysis

About Us
cable, vdsl, patch

 

Pull Boxes-Underground Vaults-OSP Pedestals-Transformer Pads-Pole Top Extension- OSP Closures-Primary Cabinets-Above Grade Enclosures

Outside Plant Products-Pull Box- OSP Vaults-Underground Vaults-Grade Level Enclosures-Pull Boxes-Handhole- Underground Enclosures- OSP Enclosures

American Data Supply, a registered CCR contracting supply company has teamed up with Alcoa, Highline Products, Carlon, Commscope, and several other leading osp fiber optic equipment manufacturers. Just click on any of the OSP fiber optic enclosures below.American Data Supply now carries several models of OSP enclosures from Highline manufacturing including Pull Boxes, Underground Vaults,OSP Pedestals,Transformer Pads, Pole Top Extensions, OSP Closures,Primary Cabinets,Above Grade Enclosures for both new provisioning installations as well as rehabilitation of existing access points. Highline Products is proud to introduce a new line of 15”, 24” and 32” transformer pads. Our innovative, patented, design results in a product that is extremely strong and durable, yet lightweight. These products are manufactured at our ISO 9000 certified plant using compression molding tools and a specially formulated sheet molding compound.

 

Pull Boxes

  • 10K and 20K load ratings available.
  • Loading characteristics conform to the Western Underground Committee recommended guide WUC 3.6.
  • Non-conductive.
  • Constructed of fire-retardant materials.
  • Cable entrances available or are easily cut in field.
  • Skid resistant covers.
  • Logo as required.
  • Penta or hex head bolts.
  • Other sizes available upon request.

FLUSH MOUNT UNDERGROUND VAULTS

PRODUCT FEATURES

  • Constructed of fire-retardant materials.
  • Skid resistant covers.
  • Pulling eyes and cable racking installed upon request.
  • Cable entrances available or are easily cut in field.
  • Logo as required.
  • Two piece covers on large size vaults.
  • Penta or hex head bolts.
  • 10K and 20K load ratings available.
  • Loading characteristics conform to the Western Underground Committee recommended guide WUC 3.6.
  • Other sizes available

Fiberglass Products

Compresson Molded- Spray Up Series- Transformer Pads

Fiberglass /Polymer Concrete

Pullboxes-Underground Vaults-Flat Pad- Barrel For Fiber Cable

Primary Cabinets

Single Phase Cabinets- Teo Phase Cabinet- Three Phase Cabinet

Pole Top Extensions

Plastic HDPE Boxes

Round Body- Rectangular Body

Highline Products is proud to introduce a new line of 15”, 24” and 32” transformer pads. Our innovative, patented, design results in a product that is extremely strong and durable, yet lightweight. These products are manufactured at our ISO 9000 certified plant using compression molding tools and a specially formulated sheet molding compound

October 26, 2004—WALTHAM, MA—Highline Products announced the completion of its development of the New Millennium single-phase box pad line. The development of an improved version of the company's compression molded products commenced three years ago. The goal was a significant reduction in the weight of the products, while still offering customers products that were 100% compliant with industry guidelines for strength, integrity and deflection over an extended life time. The result of this work is a patented design for box pads of 15", 24" and 32" heights that are 40% lighter than most products on the market. The new product line was developed in conjunction with Metis Design; a Cambridge, MA based consulting firm specializing in composite structures and our manufacturing partner, Molded Fiberglass Company.

Paul Tannenbaum, President of Highline Products, views the New Millennium product line as an extension of the high-quality products that Highline has provided to its utility customers since 1971. He said, "The box pads will be manufactured using a new family of match metal tools at Molded Fiberglass's, ISO 9000 certified plant in Ashtabula, OH. The nature of the New Millennium design allows Highline to offer an expanded number of top openings on the box pads. Thus, almost every utility will now have the opportunity to purchase compression molded parts with their consistent quality in strength, laminate structure, and external appearance at competitive prices."

In other developments, Highline completed the construction of a full family of molds for the production FRP/polymer splice boxes in sizes up 30" x 48" as well as a family of all polymer flat pads. Mr. Tannenbaum stated, "This development is consistent with Highline's overall strategy of product line expansion in order to more fully satisfy customers' needs."

 

Pull boxes can be used next to the Control Buildings.
for extra cable training room. Pull Boxes can stand alone and be used by themselves with conduit for pulling cables.These are just a few examples of Pull Boxes with different cut outs, hole sizes, and configurations.
Highline can manufacture custom Pull Box layouts with customers request. Are used in the underground distribution of power and signals. They provide access to the buried lines and allow an area for splicing and pulling of cable or housing of in-line equipment.

FLUSH MOUNT PULL BOXES

PRODUCT FEATURES

Pull Boxes

  • 10K and 20K load ratings available.
  • Loading characteristics conform to the Western Underground Committee recommended guide WUC 3.6.
  • Non-conductive.
  • Constructed of fire-retardant materials.
  • Cable entrances available or are easily cut in field.
  • Skid resistant covers.
  • Logo as required.
  • Penta or hex head bolts.
  • Other sizes available upon request.

 

Polymer

Materials: Ring & Cover
The pull/splice box ring and cover shall be constructed of polymer concrete consisting of sand and aggregate bound together with a polymer resin. Internal reinforcement may be provided by means of steel, fiberglass, or a combination of the two. The polymer concrete material is to have the following minimum allowable properties to be accepted for use:

Ultraviolet Exposure:   Tested in accordance with ASTM G-53 using an U.V.A. 340 bulb.
 
Flammability Test:   Tested in accordance with ASTM D-635.
 
Accelerated Service:   Tested in accordance with Procedure E, ASTM D-756.
 
Water Absorption:   Tested in accordance with Procedure E, ASTM D-570, Section 5,6,1, and 6.5.
 
Impact Resistance:   72 foot-pounds in accordance with ASTM D-2444 using a “C” Tup.
 
Compressive Strength:   11,000 psi tested in accordance with ASTM C-109 loaded at a rate between 28,000 lbs. to 41,000 lbs. per minute.
 
Flexural Strength:   7,500 psi tested in accordance with ASTM D-790.
 
Tensile Strength:   1,700 psi tested in accordance with ASTM C-496.
 
Skid Resistance:   0.50 coefficient of friction in accordance with ASTM C-1028.
 
Chemical Resistance:   Tested according to ASTM D-543, Section 7, Procedure 1 using the following chemicals:
Sodium Chloride 5%
Sulfuric Acid 0.1N
Hydrochloric Acid 0.2N
Sodium Sulfate 0.1N
Sodium Carbonate 0.1N
Sodium Hydroxide 0.1N
Transformer Oil Per ASTM D-543
Kerosene Per ASTM D-543
 
 

Fiberglass

 
Materials:   Base Thickness Tolerance ± 1/16” to 1/8”
 
Flexural Strength   17,000 – 18,000 psi
 
Flex Modulus   .59 – .65 psi x106
 
Tensile Strength   9,100 – 10,500 psi
 
Impact Strength (notched Izod)   15 – 17 ft lbs/inch
 
Glass Length   1” random orientation
 
Glass Fiber Orientation   Non Random
 
Resin Type   Non-Isophthalic
 
Filler   Gypsum
 
Water Absorption   ≤ 1%
 
 

Design Load Requirements

The standard product line is designed and manufactured to perform under the following load rating designations:

  • 10,400 # W.U.C. – 10,400 pound load applied over a 10” x 10” (100 square inch) area. This is in accordance with W.U.C. (Western Underground Committee recommended guide # 3.6 Non-Concrete Enclosures).
  • 20,800 # W.U.C. – 20,800 pound load applied over a 10” x 10” (100 square inch) area. This is in accordance with most Department of Transportation specifications for products installed in their right-of-way behind the curb line.
 
 

Product Test Procedures

The following test methods have been used in evaluating the physical and chemical properties of the hybrid fiberglass/polymer concrete product line.
 
Impact Properties (Izod)   ASTM D 256          ASTM D 2444
 
Compressive Strength   ASTM C 109
 
Tensile Strength   ASTM C 190
 
Flexural Strength   ASTM C 293
 
Chemical Resistance   ASTM D 543
 
Simulated Sunlight   ASTM D 1501
 
Vicat Softening Temperature   ASTM D 1525
 
Water Absorption   ASTM D 570
 
Ultra Violet Resistance   ASTM G 53
 
Brittleness Temperature   ASTM D 746
 
Flammability   ASTM D 635
 
Static Coefficient of Friction   ASTM C 1028

 

LOW PRICE GUARANTEE: American Data Supply will NOT BE UNDERSOLD. Just provide us with a written quote from any US competitor and American Data Supply will MEET or BEAT their price! Call Us For Additional Details At (866) 342-3721

We’re here to help you solve your business challenges and increase your ability to meet your own customers’ growing expectations from their telecommunications service providers.

West Coast Sales (866) 342-3721
East Coast Sales (866) 650-DATA

 

 

cisco systems Telco Systems Anritsu

Leviton

- 2012 All Rights Reserved -