<

Highline OSP Products

FIBER FUSION MARKET & Fusion Splicer Analysis

About Us
cable, vdsl, patch

 

HDPE Boxes- Underground Vaults-Plastic Boxes-OSP Plastic Boxes-OSP Enclosures- OSP Pedestals-Transformer Pads-Pole Top Extensions-OSP Closures-Primary Cabinets-Above Grade Enclosures

Outside Plant Products-Pull Box- OSP Vaults-Underground Vaults-Grade Level Enclosures-Pull Boxes-Handhole- Underground Enclosures- OSP Enclosures

HDPE Round Enclosures HDPE Enclosures

American Data Supply, a registered CCR contracting supply company has teamed up with Alcoa, Highline Products, Carlon, Commscope, and several other leading osp fiber optic equipment manufacturers. Just click on any of the OSP fiber optic enclosures below.American Data Supply now carries several models of OSP enclosures from Highline manufacturing includingHDPE Boxes, Underground Vaults,Plastic Boxes, OSP Plastic Boxes, OSP Enclosures, OSP Pedestals,Transformer Pads, Pole Top Extensions, OSP Closures,Primary Cabinets,Above Grade Enclosures for both new provisioning installations as well as rehabilitation of existing access points. Highline Products is proud to introduce a new line of 15”, 24” and 32” transformer pads. Our innovative, patented, design results in a product that is extremely strong and durable, yet lightweight. These products are manufactured at our ISO 9000 certified plant using compression molding tools and a specially formulated sheet molding compound.

General Specification Information:

  • Enclosures shall be injected molded polyofin plastic with ultra-violet additives ATSM-D-V1248
  • Box shall have adequate soil surface to prevent settling in firm soil
  • Product shall comply to ATSM-D-635 or UL-94 (Flammability of Plastic Articles)
  • Cover to have anti-skid surface
  • For use in non-vehicle traffic areas
  • Not recommended for installation in concrete or asphalt without felt expansion joint.

Ordering:

  • Specify: Part number, color, quantity, lid type
  • Pipe knockout location and size
  • Cover marking
  • "Ship to" and "Bill to" location

Freight:

Freight Definitions
   Plastic Articles    NMFC 157320
   Plastic Articles    NMFC 156600

Physical & Chemical Properties:

DESCRIPTION ASTM VALUES
Polyethylene D-1248 -
Impact Strength (12 lb. wt, "C" tup) D-1244 38 ft/lbs
Effect of Acids and Alkalies D-543 Very Resistant
Tensile Strength D-638 4415 PSI
Deflection Temp. @ 66 PSI D-648 159°F
Flexural Modulus D-790 191,000 PSI
Flammability (Horizontal cm/min) D-635 1.59 cm/min
Resistance to Ultra-Violet Light Xenon-Arc >35 w/m2/NM Band @ 340 NM G-26-92 7-9 yrs *

Plastic boxes should not be installed in concrete or asphalt without adequate rubber or FELT EXPANSION barriers.
Special product load data available on request
*- Surface Discoloration Varies with Area Condition AATCC Test Method 16E 1976

Stock Cover Identifications:

  • Irrigation control valve (ICV)
  • Water (solid or meter door)
  • Electric (green or gray)
  • Reclaimed water (green or lavender)
  • Blank (no cover marking)
  • Sewer
  • CATV
  • Telephone
  • Street lighting
  • RCV
.

Products:

General Specification Information:

  • Enclosures shall be injected molded polyofin plastic with ultra-violet additives ATSM-D-V1248
  • Box shall have adequate soil surface to prevent settling in firm soil
  • Product shall comply to ATSM-D-635 or UL-94 (Flammability of Plastic Articles)
  • Cover to have anti-skid surface
  • For use in non-vehicle traffic areas
  • Not recommended for installation in concrete or asphalt without felt expansion joint.

Ordering:

  • Specify: Part number, color, quantity, lid type
  • Pipe knockout location and size
  • Cover marking
  • "Ship to" and "Bill to" location

Freight:

Freight Definitions
   Plastic Articles
   NMFC 157320
   Plastic Articles    NMFC 156600

Physical & Chemical Properties:

DESCRIPTION ASTM VALUES
Polyethylene D-1248 -
Impact Strength (12 lb. wt, "C" tup) D-1244 38 ft/lbs
Effect of Acids and Alkalies D-543 Very Resistant
Tensile Strength D-638 4415 PSI
Deflection Temp. @ 66 PSI D-648 159°F
Flexural Modulus D-790 191,000 PSI
Flammability (Horizontal cm/min) D-635 1.59 cm/min
Resistance to Ultra-Violet Light Xenon-Arc >35 w/m2/NM Band @ 340 NM G-26-92 7-9 yrs *

Plastic boxes should not be installed in concrete or asphalt without adequate rubber or FELT EXPANSION barriers.
Special product load data available on request
*- Surface Discoloration Varies with Area Condition AATCC Test Method 16E 1976

Stock Cover Identifications:

  • Irrigation control valve (ICV)
  • Water (solid or meter door)
  • Electric (green or gray)
  • Reclaimed water (green or lavender)
  • Blank (no cover marking)
  • Sewer
  • RCV
  • CATV
  • Telephone
  • Street lighting

Fiberglass Products

Compresson Molded- Spray Up Series- Transformer Pads

Fiberglass /Polymer Concrete

Pullboxes-Underground Vaults-Flat Pad- Barrel For Fiber Cable

Primary Cabinets

Single Phase Cabinets- Teo Phase Cabinet- Three Phase Cabinet

Pole Top Extensions

Plastic HDPE Boxes

Round Body- Rectangular Body

Pull Boxes

Highline Products is proud to introduce a new line of 15”, 24” and 32” transformer pads. Our innovative, patented, design results in a product that is extremely strong and durable, yet lightweight. These products are manufactured at our ISO 9000 certified plant using compression molding tools and a specially formulated sheet molding compound

October 26, 2004—WALTHAM, MA—Highline Products announced the completion of its development of the New Millennium single-phase box pad line. The development of an improved version of the company's compression molded products commenced three years ago. The goal was a significant reduction in the weight of the products, while still offering customers products that were 100% compliant with industry guidelines for strength, integrity and deflection over an extended life time. The result of this work is a patented design for box pads of 15", 24" and 32" heights that are 40% lighter than most products on the market. The new product line was developed in conjunction with Metis Design; a Cambridge, MA based consulting firm specializing in composite structures and our manufacturing partner, Molded Fiberglass Company.

Paul Tannenbaum, President of Highline Products, views the New Millennium product line as an extension of the high-quality products that Highline has provided to its utility customers since 1971. He said, "The box pads will be manufactured using a new family of match metal tools at Molded Fiberglass's, ISO 9000 certified plant in Ashtabula, OH. The nature of the New Millennium design allows Highline to offer an expanded number of top openings on the box pads. Thus, almost every utility will now have the opportunity to purchase compression molded parts with their consistent quality in strength, laminate structure, and external appearance at competitive prices."

In other developments, Highline completed the construction of a full family of molds for the production FRP/polymer splice boxes in sizes up 30" x 48" as well as a family of all polymer flat pads. Mr. Tannenbaum stated, "This development is consistent with Highline's overall strategy of product line expansion in order to more fully satisfy customers' needs."

Pull boxes can be used next to the Control Buildings.
for extra cable training room. Pull Boxes can stand alone and be used by themselves with conduit for pulling cables.These are just a few examples of Pull Boxes with different cut outs, hole sizes, and configurations.
Highline can manufacture custom Pull Box layouts with customers request. Are used in the underground distribution of power and signals. They provide access to the buried lines and allow an area for splicing and pulling of cable or housing of in-line equipment.

FLUSH MOUNT PULL BOXES

PRODUCT FEATURES

Pull Boxes

  • 10K and 20K load ratings available.
  • Loading characteristics conform to the Western Underground Committee recommended guide WUC 3.6.
  • Non-conductive.
  • Constructed of fire-retardant materials.
  • Cable entrances available or are easily cut in field.
  • Skid resistant covers.
  • Logo as required.
  • Penta or hex head bolts.
  • Other sizes available upon request.
LOW PRICE GUARANTEE: American Data Supply will NOT BE UNDERSOLD. Just provide us with a written quote from any US competitor and American Data Supply will MEET or BEAT their price! Call Us For Additional Details At (866) 342-3721 or (866) 650-DATA or Click On The Chat Button At The Top Of The Page To Talk To Us

We’re here to help you solve your business challenges and increase your ability to meet your own customers’ growing expectations from their telecommunications service providers.

Call Us Today Tollfree At (866) 342-3721 or (866) 650-DATA

Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives