<

Copper Telecom Cables-PE 89-PE 89- PE 39

About Us
cable, vdsl, patch

 

PE89-Copper Telecom Cables-PE 89-PE 89 Cable-50 Pair PE 89-100 Pair PE 89-Seal Pic FSF PE 89- Seal Pic FSF PE 39- 25 pair PE 89

PE 89- Most Sizes- We carry 6 Pair -2500 Pair PE 89-Please call (866) 342-3721

American Data Supply Carries a complete line of PE89, stub cable, transition cable, and PE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair PE 89 to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable.SEALPIC®-FSF Cables are designed for low risk direct burial or duct applications where protection from moisture is required and aluminum shielding is desired. SEALPIC-FSF may be used aerially, but must be attached to a support strand.

Please visit our wholesale division page for PE 89 cable reel sizes and PE 89 cable pairs.

American Data Supply Is Your One Source For All Your Copper Cable-Data-Fiber Optic Needs

West Coast Sales (866) 342-3721 East Coast Sales (866) 650-DATA

 

CASPIC®-FSF PE 89 cables are designed for direct burial or duct applications where protection from moisture is required. CASPIC-FSF PE 89 cables are recommended for use in high-risk areas where additional mechanical or rodent protection is required. CASPIC-FSF may be used aerially, but must be attached to a support strand.SEALPIC®-FSF cables are designed for direct burial or duct applications where protection from moisture is required and aluminum shielding is desired

American Data Supply Is Your One Source For All Your Copper Cable-Data-Fiber Optic Needs

West Coast Sales (866) 342-3721 East Coast Sales (866) 650-DATA

American Data Supply Carries Sizes From 6 Pair PE 89-To- 2400 Pair PE 89 Cable

 

American Data Supply Carries a complete line of PE89, stub cable, transition cable, and PE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair PE 89 to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993. Depending on destination we will quote and supply PE 89 cable from General, Essex or other suppliers.

PE 89 Cable
Type PE 89 Copper Cable -PE 89 Wholesale Division
Price Per Foot- CALL
PE 89 Cable Part #American Data Supply OSPPE89-06 6 Pair PE 89 Cable - Cable is cut to order- 19 gauge- 6 pair PE 89
Call
PE 89 Cable Part #American Data Supply OSPPE89-12 12 Pair PE 89 Cable- Cable is cut to order-19 Gauge 12 Pair PE 89 Cable
Call
PE 89 Cable Part #American Data Supply OSPPE89-18 18 Pair PE 89 Cable -Cable is cut to order-18 pair- 19 gauge 18 Pair PE 89 Cable
Call
PE 89 Cable Part #American Data Supply OSPPE89-25 25 Pair PE 89 Cable -Cable is cut to order- 19 gauge 25 Pair PE 89 Cable
Call
PE 89 Cable Part #American Data Supply OSPPE89-50 50 Pair PE 89 Cable .278lbs/foot Cable is cut to order
Call
PE 89 Cable Part #American Data Supply OSPPE89-75 75 Pair PE 89 Cable - Cable is cut to order
Call

PE 89 Cable# ATSOSPPE89-100

100 Pair PE 89 Cable .484lbs/foot Cable is cut to order
Call

PE 89 Cable# ATSOSPPE89-150

150 Pair PE 89 Cable .484lbs/foot Cable is cut to order-19 Gauge 150 pair PE 89 Cable
Call
PE 89 Cable Part# OSPPE89-200 200 Pair .PE 89 Cable 945lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-300 300 Pair PE 89 Cable 1.272lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-400 400 Pair PE 89 Cable .1.66lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-600 600 Pair PE 89 Cable 2.532lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-900 900 Pair PE 89 Cable 3.868lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1200 1200 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1500 1500 Pair PE 89 Cable 6.215lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1800 1800 Pair PE 89 Cable 7.385lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2100 2100 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2400 2400 Pair PE 89 Cable 9.910lbs/foot Cable is cut to order
Call

For Complete 20 Foot and 40 Foot Container Load Cable Descriptions For PE 89 Visit Our Whole Division

Outdoor- Underground CAT 5e- CAT 6 Cable- More Info- American Data Supply stocks thousands of direct bury CAT 5e cable, underground CAT 5e cable- Direct Bury CAT 6 cable-More Info

Please Call For all Copper Cable Pricing -Since Late 2005 Raw Commodity Prices For Copper and Oil Based (PVC) Products Change Daily - Call For Latest Pricing For Our Our PE 39 & PE 89 Cables

Stub Cable- Transition Cable-PE 89, 25 Pair PE 89, Copper Telecom Cables,Seal Pic FSF PE 89- Transition Cables- Seal Pic FSF PE 39- Stub Cables- Direct Bury Copper Telecom Cables-Icky Pick

American Data Supply Carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).American Data Supply Carries a complete line of stub cable, transition cable, andPE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair to 200 pair PE 89 configurations.

The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993.

PE 89 Cable

 

Our PE 89 Cable Comes in Several Reel Lengths- Some Cut Charges May Apply

 

PE 89 Cable
Type PE 89 Copper Cable
Price Per Foot- CALL
PE 89 Cable Part #American Data Supply OSPPE89-06 6 Pair PE 89 Cable - Cable is cut to order- 19 gauge- 6 pair PE 89
Call
PE 89 Cable Part #American Data Supply OSPPE89-12 12 Pair PE 89 Cable- Cable is cut to order-19 Gauge 12 Pair PE 89 Cable
Call
PE 89 Cable Part #American Data Supply OSPPE89-18 18 Pair PE 89 Cable -Cable is cut to order-18 pair- 19 gauge 18 Pair PE 89 Cable
Call
PE 89 Cable Part #American Data Supply OSPPE89-25 25 Pair PE 89 Cable -Cable is cut to order- 19 gauge 25 Pair PE 89 Cable
Call
PE 89 Cable Part #American Data Supply OSPPE89-50 50 Pair PE 89 Cable .278lbs/foot Cable is cut to order
Call
PE 89 Cable Part #American Data Supply OSPPE89-75 75 Pair PE 89 Cable - Cable is cut to order
Call

PE 89 Cable# ATSOSPPE89-100

100 Pair PE 89 Cable .484lbs/foot Cable is cut to order
Call

PE 89 Cable# ATSOSPPE89-150

150 Pair PE 89 Cable .484lbs/foot Cable is cut to order-19 Gauge 150 pair PE 89 Cable
Call
PE 89 Cable Part# OSPPE89-200 200 Pair .PE 89 Cable 945lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-300 300 Pair PE 89 Cable 1.272lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-400 400 Pair PE 89 Cable .1.66lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-600 600 Pair PE 89 Cable 2.532lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-900 900 Pair PE 89 Cable 3.868lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1200 1200 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1500 1500 Pair PE 89 Cable 6.215lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1800 1800 Pair PE 89 Cable 7.385lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2100 2100 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2400 2400 Pair PE 89 Cable 9.910lbs/foot Cable is cut to order
Call

Telecommunications Cables FAQs Text (see below)

What is the temperature range that outside plant cable can withstand?

For storage and operation:   -45 degrees to 80 degrees Celsius
                                         -49 degrees to 176 degrees Fahrenheit

For installation:   -30 degrees to 60 degrees Celsius
                         -22 degrees to 140 degrees Fahrenheit


What is the bend radius of outside plant cable?

The bend radius for all Outside PIC cable is not less than 10 times the diameter (O.D.) of the cable. For example, if the cable O.D. is .52 inches, then the bend radius for that cable is not less than 5.2 inches.


What is the maximum pulling tension or tensile strength that can be placed on outside plant cable
?

It is calculated based on the pair count and gauge of the conductors.
19 AWG = the maximum force is 22.1 lbs. per pair
22 AWG = the maximum force is 11.0 lbs. per pair
24 AWG = the maximum force is 6.6 lbs. per pair
26 AWG = the maximum force is 4.4 lbs. per pair


Are outside plant products Category 3 compatible?

In sample testing it was determined that our filled and air core cable meet or exceed Category 3 transmission requirements. Please note that RUS(REA) specification does not require testing to category 3 parameters.

Can outside plant cable be submersed in water?

We do not recommend submersing outside plant products in water. If a customer requires that a particular product be installed in water, please contact our Engineering department for suggestions

 

Description Of Types PE 89- PE 39 Cables:

PE 89 cable

PE 39 Cable

American Data Supply Carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).

Part Numbers: Please Note after ATSPE89 or ATSPE39 is the "number of copper cables"

PE 89 Cables: ATSPE89-50

PE 39 Cables: ATSPE39-50

Application:

Suitable for use as direct burial communication applications where protection against water and moisture entry is a critical requirement. PE – 89 is recommended where rodent attack is possible.SEAL PIC-FSF  is designed as a duct, aerial or direct burial cable in either exchange area service or trunk service.  The core is filled with an 80 degree Centigrade filling compound and the sheath interfaces  are flooded with a flooding compound.  The polymer coating provides additional corrosion protection for the aluminum shield.

PE 22 OSP Cable Available in strand counts from 6 to 2100, with various wire gauges. Insulated conductors are color coded to telephone industry standards. For aerial installation by attachment to a support strand and/or underground installation in a duct

P 89 Cable Avaialable in pair counts from 6 to 1800 and variouse wire gauges, Insulated conductors are color coded to telephone industry standards. Used primarily in buried and ducted environments where moisture protection is needed. Also available with armoring for increased mechanical protection.

    American Data Supply Part Number
    Description
    Due To Fluctuating Wholesale Oil Costs Call For Pricing
    PE22 1203 PE22 24AWG 6 pair .008 aluminum tape shield outside plant telephone cable
    PE22 1204 PE22 24AWG 12 pair .008 aluminum tape shield outside plant telephone cable
    PE22 1205 PE22 24AWG 25 pair .008 aluminum tape shield outside plant telephone cable
    PE22 1206 PE22 24AWG 50 pair .008 aluminum tape shield outside plant telephone cable
    PE22 1405 PE22 19AWGÿ 50 pair pair outside plant telephone cable
    PE22 1406 PE22 19AWGÿ 25 pair pair outside plant telephone cable
    PE38 1205 PE38 24AWG 25 pair .008 aluminum tape shield outside plant telephone cable with 1/4 messenger
    PE38 1206 PE38 24AWG 50 pair .008 aluminum tape shield outside plant telephone cable with 1/4 messenger
    PE38 1305 PE38 22AWG 25 pair .008 aluminum tape shield outside plant telephone cable with 1/4 messenger
    PE38 1306 PE38 22AWG 50 pair .008 aluminum tape shield outside plant telephone cable with 1/4 messenger
    PE39 1203 PE39 24AWG 6 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1204 PE39 24AWG 12 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1205 PE39 24AWG 25 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1206 PE39 24AWG 50 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1305 PE39 22AWG 25 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1306 PE39 22AWG 50 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1403 PE39 19AWGÿ 6 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1404 PE39 19AWGÿ 12 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1405 PE39 19AWGÿ 25 pair .008 aluminum tape shield outside plant telephone cable
    PE39 1406 PE39 19AWGÿ 50 pair .008 aluminum tape shield outside plant telephone cable
    PE89 1203 PE89 24AWG 6 pair foam skin .008 aluminum tape shield outside plant telephone cable
    PE89 1205 PE89 24AWG 25 pair foam skin .008 aluminum tape shield outside plant telephone cable
    PE89 1206 PE89 24AWG 50 pair foam skin .008 aluminum tape shield outside plant telephone cable
    PE89 1303 PE89 22AWG 6 pair foam skin .008 aluminum tape shield outside plant telephone cable
    PE89 1305 PE89 22AWG 25 pair foam skin .008 aluminum tape shield outside plant telephone cable
    PE89 1306 PE89 22AWG 50 pair foam skin .008 aluminum tape shield outside plant telephone cable

Construction:

Conductor: Soft drawn bare copper (ASTM Spec. B-3). Solid (22 awg)

The assembly is then wrapped with two metal shield tapes:

- A corrugated .008" thick polymer coated aluminum tape and a corrugated .006" polymer coated steel tape.

REA PE-89

  • CONDUCTOR:    Solid annealed bare copper, sizes 19 AWG (.9mm ), 22 AWG  (.64mm), and 24 AWG (.5mm).

  • INSULATION:    Inner layer of foamed natural polyolefin covered by outer layer of solid colored polyolefin, color coded in accordance with standard telephone industry code.

  • TWISTED PAIRS:    Individual conductors twisted into pairs with varying lays to minimize crosstalk and with specified color combinations to provide pair identification. 

  • CABLE ASSEMBLY:    Cables having 25 pairs or less are assembled in a single group.  Cables having more than 25 pairs are assembled in units, each individually identified by color coded unit binders.  The interstices between the pairs are filled with an 80 degree Centigrade filling compound.

  • CORE COVERING:    Non-hygroscopic dielectric tape.

  • SHIELD:     SEALPIC-FSF-Electrically continuous 0.008 in. (0.2mm) thick polymer coated, corrugated aluminum tape applied longitudinally with overlapped edges and flooded with a flooding compound.

  • JACKET:    Black polyethylene.

  • IDENTIFICATION AND LENGTH MARKING:    Manufacturer's identification, pair count, conductor size, and year of manufacture are surface marked on the jacket at 2ft. intervals.  Sequentially numbered length markings are located at alternate 2 ft. intervals.

MEETS REA SPECIFICATION PE-89, LATEST ISSUE.
*REA PE-39 available upon request.

Inner Jacket: Polyethylene (PE)

Outer Jacket: Polyethylene (PE)

Temperature: 60 C

Resistance: 17.235 OHMS PER M FEET at 68 DEG. F


Call for pricing, minimum order $500.00- Please- American Data Supply offers cutting of cable-For custom cable lengths at an additional cost-

West Coast (866) 342-3721
New Southern CA Office ( 760) 471-8200
East Coast (866) 650-3282

For More Information On Any of the Products Below- Just click on the Pictures -More Information and Specifications For PE 39 and PE 89 Below

PE 89 Application:
For use in wet environments where protection from moisture is required. Approved for direct burial, duct or aerial installations when supported by a messenger.

PE 89 Conductors:
Solid soft bare annealed copper. Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk.

PE 89 Insulation:
Dual layer of foamed polyolefin and solid polyolefin.

PE 89 Filling Compound:
Cable core is filled with an extended thermoplastic rubber (ETPR) filling the interstices between the pairs and under the core tape.

PE 89 Core Wrap:
Non-hygroscopic, dielectric tape with overlap.

PE89 Shield:
Corrugated, copolymer coated, 8-mil aluminum tape longitudinally applied with overlap. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.

PE 89 Jacket:
Black, sunlight-resistant, linear low-density polyethylene.

Additional Standards:
• ANSI/ICEA S-84-608-1994 • RUS 7 CFR 1755.890 (formerly REA PE-8

Stub Cable

Stub Cable- Stub Cable is factory process filled cable that is cut to customer specified lengths eliminating time-consuming cable preparation at the customer job site. The Stub Cable features a factory installed pneumatic cable "block" on one end of the cable (a variety of cable types are available; 22, 24, 26 gauge cable with pair counts from 50 to 1800 pair sizes). The cable block prevents air and/or filling compound leakage from pressurized cable plant to non-pressurized cable plant. The cable block is typically located 120 inches from one end of the cable and is sealed using state of the art blocking compounds. The cable block is small in diameter relative to the cable diameter to minimize obstructions and clearances from adjacent cable plant.

Transition cable- Transition Cable is a factory processed filled cable that is pre-cut to custom lengths. This eliminates time-consuming on-site preparation and the use of hazardous cleaning chemicals in the field. Additionally, cables can be provided with optional factory-installed connector modules and pulling eyes.

 


COPPER TELECOM CABLES


1. Foam Skin Insulated Conductor
2. Core wrapping
3. Inner PE jacket
4. Aluminium Foil
5. Outer PE jacket BRIEF DESCRIPTION
Annealed Copper Conductor
Foam Skin Insulation
Moisture Barrier
Double PE Sheathed
   
KPD - PAP TYPE CABLE KPDF - PAP TYPE CABLE
   
   
KPD - AP TYPE CABLE KPDF - AP TYPE CABLE
   
   
KPD - AP - A TYPE CABLE KPDF - AP - A TYPE CABLE
   
   
KPD - P TYPE CABLE KPD - V TYPE CABLE
   
KPD - P - A TYPE CABLE FSQAF-SWA-P TYPE CABLE
   
 
   
FSQAF-STA-P TYPE CABLE VD - AP TYPE CABLE
   
 
   
VD - V TYPE CABLE BPDT OUTDOOR DROP WIRE
   
 
   
VD - PAP TYPE CABLE BVIT INDOOR DROP WIRE
   
 
 
 
BVCT (JUMPER WIRE)
 

Call for pricing, min order $500.00 please

LOW PRICE GUARANTEE: American Data Supply will NOT BE UNDERSOLD. Just provide us with a written quote from any US competitor and American Data Supply will MEET or BEAT their price! Call Us For Additional Details At (866) 342-3721

Lowest Priced Corning- Emerson-Aloca Fiber Cable-Jumpers in the U.S.

Additional Links

We’re here to help you solve your business challenges and increase your ability to meet your own customers’ growing expectations from their telecommunications service providers.

West Coast Sales (866) 342-3721
East Coast Sales (866) 650-DATA

Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

home | cables | switches | Contact Us our team | locations