<
   Other Products
     About Us

Snake Tube-Fire Rated Raceway- Fire Rated Innerduct- Fire Proof Innerduct- Fireproof Raceway-Snake Tray-Raceway Systems Supplier-Snake Tray Distributor- Under Floor Raceway Systems- Snake Tray Megasnake -Raceway Systems Supplier-Snake Tray Distributor- Cable Management- Underfloor Raceway- Snake Under Floor-Raceway Accessories-Ladder Rack Systems-Overhead Raceways- Cable Tray Supplier-CableTray- Raceways-Snake Tray Cable Tray-Megasnake-Megasnake Raceway System-Ladder Snake Tray-Ladder Rack Snake Tray-Snake tray 101 Deep Tray-Snake Tray Wall Snake-Snake Tray Fire Stop-Snake Tray Firestop-Snake Tray Fire Protection Systems-Under Floor Raceway-Overhead Raceway-Wall Raceway Solution-Power Raceway Solution-Snake Charmer-Snake Canyon-Mega Snake-Raceway Solutions-Megasnake Raceway Systems-Ladder Cable Tray-Solid Cable Tray-Trough Cable Tray-Channel Cable Tray-Wire Mesh Cable Tray-Single Rail Cable Tray-Multiconductor Cables-Multiconductor Cables in Cable Trays-Snake Loop-Snake Bus-Cable Tray-Cable Trays-Cable Tray Systems-Cable Tray Wiring-Cable Management-Cable Management Systems-Electriduct Supplier-Flextray-BasketTray-Snake Hook-Seismic Bracing-Snaketray Mounting Accessories-Cable Tray Distributor-Call Tollfree (866) 342-3721 or click the live support button below to talk to one of our representatives

Snake Tray- Ladder Snake Tray

American Data Supply now offers Snake Tray cable tray and raceway systems which is the world's only hand bendable cable management system that bends in any direction in seconds without cutting, clipping or sharp edges

American Data Supply now offers Snake Tray cable tray and raceway systems which is the world's only hand bendable cable management system that bends in any direction in seconds without cutting, clipping or sharp edges. American Data Supply also carries the entire line of Snake Tray-Raceway Systems- Cable Management- Underfloor Raceway- Overhead Raceways- Cable Tray-CableTray and Raceways. Generic wire basket cable tray systems will take up to 20 minutes to fabricate the same turn. Check out our underfloor, overhead and wall Snake Trays for your next project! You can click here for your own Snake Tray Raceway Design Wizard or get more information below.

Ladder Snake Tray

Home - Cable Raceways Wire Management Systems-Snake Tray Cable Management

Snake Tray® 601 Series
Ladder Snake-Ladder Snake is  a new series of cable trays for ladder racks.  Ladder Snake is designed to increase the cable carrying capacity of new or existing ladder racks.

Simply clip Ladder Snake 601 onto a new ladder rack to instantly gain greater cable carrying capacity.  Clip Ladder Snake 601HP onto an existing ladder rack to create a new second tier cable path. Ladder Snake's easy clip on feature requires no hardware to attach to the ladder rack.  Ladder Snake also offers a smooth transition from one ladder rack to another by simply bending Ladder Snake by hand to create instant turns.

Ladder Snake is a quick and cost effective way to get more from your ladder rack.  It's easy clip on feature offers labor savings over traditional methods of installing individual brackets to create sidewalls on ladder racks.

 

 

The new 601 Series of cable trays called Ladder Snake™ is especially designed for ladder racks. Ladder Snake ™ instantly bends by hand without any cutting or clipping to ensure a smooth transition from one ladder rack to another. You just snap Ladder Snake ™601 onto a new ladder to instantly gain greater cable capacity. You can also snap Ladder Snake (TN) 601 HP (half the depth of CM-601-12-8) onto an existing ladder rack to bridge over the existing cable plant to create a new second tier cable path. NO Additional hardware or brackets are needed to attach to the ladder rack. Ladder Snake™ has an easy clip on feature to save you money and installation costs!

 

Ladder Snake, cable snake

 Features

  • Constructed in cold rolled steel
  • The most flexible cable runway system designed to support fiber optic cables and voice/telecommunication cables
  • Utilized both below raised floors and overhead either mounted to walls or suspended from the ceiling.
  • Easy on site installation
  • Proven savings in installation costs of 85%!
  • NO tools needed to hand bend the cable tray in ANY direction
  • NO sharp edges –No injuries to the installer or cable
  • Creates turns in 10 seconds versus 20 minutes with other methods
  • Made of cold rolled steel (ASTM A510) and zinc plated ( ASTM B633C2)
  • Hand bend the cable tray over any obstacle “JUST BEND IT AND DROP IT IN”!
  • Connect Snake Trays together with only one UL listed connector bolt
  • 15 seconds to connect trays together versus 10 minutes with other methods
  • Built in hanging hardware
  • No engineering time used to determine what hardware to use
  • Hangs from a Single Point
  • Lower labor cost when suspending tray from a single point
  • Designed for cables to be able to enter or exit at ANY point in ANY direction
  • Mounting hardware is simple and can be used for both computer access floor and overhead installations
  • Single or Double Pocket design
  • UL Listed for its weight carrying capacity
  • EIA/TIA and NEC Compliant
  • NFPA 708 Compliant (NFPA 708)
  • Favored, specified and used by universities, Fortune 500 companies, and the US Government
  • No job is too large or small for this quality Snake Tray system
  • Trays nest together to lower freight costs
  • Ships from inventory within a day.
  • Made in the USA

Ordering Information

Image PART # Physical Dimensions Loading Dimensions
Depth x Width
Cable Capacity
Physical Volume
Weight of Cables as Tested per Linear FT at 100% Fill Capacity PRICE
CM-601-12-8 10-1/4" H x 14-1/4" W 6-1/2" 55si 785 25.75 lbs/ft $92.20
CM-601HP-12-8 10-1/4"H x 14-1/4" W 3-1/2" 30si 425 14.50 lbs/ft $97.00

Related Items

501 Series Wall Snake Tray
501 Series Wall Snake Tray
From $41.50
The 501 Series Wall Snake Tray is utilized for long linear installations where space is at a premium. Installers know the difficulty of using cable trays in tight spaces but the wall snake tray is the best solution because they are designed to allow the tray to be directly attached to a wall without the use of brackets . The tray uses integrated mounting rings located along the center spine of the tray. With these rings, no additional brackets or mounting hardware is required.
   
Single Snake Tray 201 Series
From $51.00
The 201 Snake Tray is available in four sizes .The tray is a single pocket design that can accommodate up to 24 square inches of cable path equal to a 12” generic basket or ladder type tray or 250 cables .25” OD as per NEC Article 318-9(b)
   
Double Snake Tray 201 Series
From $85.75
The Double Snake 201 Series has a double packet design providing a natural separation for both voice data cables and fiber cables. The double Snake allows for 50 square inches of cable path holding up to 510 cables .25” OD as per NEC Article 318-9(b) both below raised floors or overhead mounted to walls or suspended from a ceiling.
   

Snake Canyon® has revolutionized the way cable paths are created in a computer-raised floor environment. Snake Canyon integrates the structural elements of an access floor with a high capacity cable tray to create a cable path directly beneath the floor tile for easy access and installation.

Snake Loop

Snake Bus Power Distribution System is the newest member in the Snake Tray family of products. Snake Bus brings you up to 15 kilowatts power where you want it - in seconds. Snake Bus’ streamlined design quickly installs to handle all your power needs in a computer access floor environment.

Ladder Rack Snake Tray

Snake Tray 101 Deep Tray- Snake Tray® is pleased to announce the new larger size 18-inch wide and 4-inch deep cable tray that creates 72 square inches of cable path to hold over 1000 Cat5e (.21 OD) cables

Snake Tray Wall Snake®
CMS Snake Tray is pleased to present our 501 Series Snake Tray. Wall Snake™ is our 501 Series Snake Tray which is the perfect solution for long linear installations where space is at a premium. The Wall Snake is designed to allow the cable tray to be mounted directly to the wall by using integrated mounting rings that run along the spine of the cable tray. No mounting brackets are required! Available in four sizes 4, 9, 25, and 36 square inch pathways, Wall Snake can accommodate over 350 cables at 100% fill. Wall Snake is the ideal solution
for tight spaces, long linear runs, wall fields, data closets, hallways, schools, municipal buildings and hospitals.

Snake Tray Fire Stop-Snake Tray® is pleased to announce the first in a series of new Snake Stop Fire Protection systems.

 

Under Floor Raceway Solution-The 101 series Snake Tray® is specially designed for installation below a raised floor and as risers on vertical surfaces. Available in five sizes, the 101 series tray can accommodate up to 72 square inches of cable path. Mounting rings are performed into the support legs, which elevates the cable path above the floor and requires no additional brackets.

Overhead Raceway Solution-The 201 Series Snake Tray® is our most popular cable tray due to its versatility in applications. The 201 Series Snake Tray can be mounted below access floors, wall mounted, ceiling mounted or suspended from a threaded rod. Available in six sizes, the 201 Series Snake Tray can accommodate up to 50 square inches of cable path which can hold over 500 Category 5/6 cables at 100% fill. The patented top mounted center spine allows the tray to be easily bent by hand to create both vertical and horizontal bends when needed to go over and around obstacles.

Wall Raceway Solution-Snake Wall -Wall Snake™ is our 501 Series Snake Tray which is the perfect solution for long linear installations where space is at a premium. The Wall Snake is designed to allow the cable tray to be mounted directly to the wall by using integrated mounting rings that run along the spine of the cable tray. No mounting brackets are required! Available in four sizes 4, 9, 25, and 36 square inch pathways, Wall Snake can accommodate over 350 cables at 100% fill. Wall Snake is the ideal solution
for tight spaces, long linear runs, wall fields, data closets, hallways, schools, municipal buildings and hospitals.

Under Floor Solution- Snake Canyon-Snake Canyon® is a modular cable tray system that integrates the structural elements of a computer raised floor with a high capacity cable tray into one easy to install drop-in element. No additional hardware or floor modifications are necessary to complete the installation.

Power Raceway Solution- Snake BusFrom the manufacturers of Snake Tray comes Snake Bus a new sleek, innovative power distribution system that brings you power where you want it - in seconds-Installations and retrofits are easily done
with the Snake Whips (tap offs) that deliver power to equipment anywhere along the track with a 10 second connection.

Snake Charmer-Before Snake Charmer-After Snake Charmer™ Eliminates PC wire tangles and clutter on workstations -

Snake Charmer’s is our new wire manager for workstations. Manage the cable chaos and avoid workplace accidents at your workstations by organizing the cables in an easy to use module that has ample capacity for today’s equipment wires.

Simply take the excess wires and place through the entry point on the base unit and loop the wires around pre-existing posts. Wires can exit from either side of the module. Simply snap cover on and wires are attractively concealed. Snake Charmer can be mounted to the wall, any desk side, configuration component or remain free standing.

Click-In Snake Canyon® for Computer Access Floors

Benefits:

Completely hand bendable, Snaketray’s unique design allows it to bend
in any direction along any plane without tools or the need to cut wires.

Built-in mounting hardware reduces part numbers and cuts labor costs.

Snake Canyon compliments access floor installations with its “drop-in” installation method, locates cables directly below the floor tiles and provides complete separation from adjacent services.

Available for use overhead, wall mount or under raised floors, CMS products
provide unmatched site condition adaptability and superior affordability.

Snake Tray bends (vertically & horizontally) by hand for an effortless transition
from floor to wall to ceiling and around obstacles without the need for accessories.

Open architecture allows cables to enter and exit the tray at any point in any
direction. Simple clip-in cable “waterfalls” maintain proper bend radii for cables
.

- 2012 All Rights Reserved -