Search our site American Data Supply

cable, vdsl, patch

Telco Systems - TDM – Multiplexers – SONET - Multi-service IAD - E/O Converters - EdgeLink Mini-Mux 840 - 84 T1 or 63 E1 lines into OC-3 (STM-1)  - EdgeLink Hub - M13 Distribution Hub - EdgeLink Exchange Mux II - T1/E1 to T3, STS-1, AU3, OC-3 or STM-1 - EdgeLink100 T1/E1 - DS3 Multiplexer  - EdgeLink Mini-Mux 2000 - Ethernet over PDH (EoPDH)
VoIP FTTx Carrier Ethernet Ethernet Demarcation Multi-Service Access Optical Transport Wavelength Multiplexing TDM NMS/EMS Network Optimization	TDM » Multiplexers Many service providers rely on SONET fiber networks to satisfy their customers' demand for greater speed, superior quality of service (QOS) and lower transport costs. To realize the advantages of SONET, however, you need access solutions at the network edge that enable easy, cost-effective, reliable delivery of T1 tariffed services. Telco Systems' TDM product family enables service providers to more efficiently deliver T1 services from their core transport systems and deliver voice and data over the last-mile. The wide range of product families includes distribution hubs, multiplexers, digital cross connects, multi service IADs, E/O converters and transport terminals. The family includes an optical SONET edge solution that allows service providers to deliver traditional T1, T3, and Ethernet services over an OC-3 fiber feed via virtual concatenation (VC), without the wasted bandwidth found with traditional Packet over SONET (PoS) offerings. Sub-categories: Multiplexers SONET Multi-service IAD E/O Converters

The EdgeLink Mini-Mux 840 combines 84 T1 (63 E1) into an OC-3 (STM-1) within a one rack-unit shelf. Mini-Mux 840 combines the functionality of three complete M13 Multiplexers with an OC-3 (STM-1) Add/Drop Multiplexer. Small size, simple installation and configuration, multiple power options, and a temperature-hardened platform make the Mini-Mux 840 the industry’s most flexible optical broadband multiplexer.

The Mini-Mux 840 is ideal for mass termination of OC-3 (STM-1) into T1 (E1) signals, highly-efficient intra-office transport of T1 (E1) lines, wireless or DLC backhaul, or anywhere minimal space and low power consumption is a must. UPSR ring deployment is also supported.

EdgeLink Hub, M13 distribution hub, enables service providers to more efficiently deliver T1 services from their core transport systems. Its ease of operation and flexibility allows them to quickly and cost-effectively expand service delivery without the burden and cost of additional shelves. This compact CO solution, only 5 RU, can hub up to 9 DS3 drops off core transport equipment such as SONET add/drop multiplexers (ADM), digital cross-connect (DCS) or C.O. switch, for high density DS1 distribution.

• Compact – only 5 RU
  
• NEBS Level 3 certified
  
• Hot insertion and card swap out
  
• Full SNMP and TL1 management
  
• Internal loop back and line testing capabilities
  
• Menu-driven RS-232 interface
  
• Non-intrusive software upgrades
  
• Standard 64 pin Cinch connectors for DS1s
  
• Custom rack-and-stack configurations available

The EdgeLink Exchange Mux chassis-based multiplexer offers flexible, scalable multiplexing of T1/E1 signals into T3, STS-1, AU3, OC-3 or STM-1. The chassis supports 7 fully redundant muxes in a 2RU shelf.

The Exchange Mux is the ideal solution for

• High density / low power multiplexing in collocation deployments


• Programmable M13 multiplexing


• Deliver T1/T3 to enterprises from SONET (OC-3) rings


• DS3 range extension

EdgeLink100 is the industry's smallest, most cost-effective DS3 multiplexer available. Its compact, plug-and-play architecture enables service providers to turn up T1s and/or E1s fast, saving installation time and costs as well as valuable real estate. Deployed at every edge of the network from the core to the CPE Edge.

Cuts service deployment costs

• Compact – only 1 RU – saves valuable real estate
  
• Plug-and-play architecture – fast and easy to install
  
• Remotely manageable
  
• TFTP Software Downloadable – in-service upgrades
  
• Redundant architecture – 1:1

The Mini-Mux 2000 combines the functionality of a DS3 Add Drop Multiplexer (ADM) with support for Ethernet. Using the latest in Ethernet over PDH (EoPDH) technology, the Mini-Mux 2000 maps Ethernet into DS3 or DS1 facilities, allowing operators to fully leverage existing networks.

Its compact one rack unit size, front access for all connections, and environmentally hardened design enables deployment in any location. With support for Point-to-Point, Linear Add/Drop, or Ring Add/Drop topologies, the Mini-Mux 2000 is the industry’s most flexible DS3 ADM.

The EdgeLink Mini-Mux 2000 is ideal for

• Provision Ethernet and T1 services over PDH (DS3 or DS1) infrastructure


• Wireless Backhaul of T1 and Ethernet


• Microwave Radio Transport Systems


• Replace back-to-back M13 Multiplexers


• Point-to-Point, Ring Add/Drop, Linear Add/Drop, or Terminal Multiplexer configurations


• 10/100Mbps over NxT1 facilities