Low Cost Fiber Optic Media Converters-Low Cost Fiber Media Converter-Fiber Optic Media Converters-Fiber Media Converters- Fiber Optic Media Converter- Fiber Optic Converters-Fiber Optic Converter-Multimode Media Converters- Singlemode Media Converters

American Data Supply stocks a complete line of low cost fiber optic media converters ranging from a full range of low cost multimode and low cost singlemode media converters. These are manufacturered by a large OEM equipment manufacture that sells these same converters 50% or lowr than name brand media converters.

Low Cost Singlemode Media Converter and Multmode Media Converters

Low Cost and economical Singlemode and Multimode Fiber Optic Media Converter

Multimode Fiber Optic Media Converters	American Data Supply Part Number	Multimode Fiber Optic Media Converter Description	Price Each-Please Call For Discounts!
	Multimode Fiber Optic Media Converter ATS102502 Fiber Media Converter	Multimode Fiber Optic Media Converter-100Base TX to FX RJ45- SC Multimode Media Converter	$69.88 each
	Multimode Fiber Optic Media Converter ATS102503 Fiber Optic Media Converter	Multimode Fiber Optic Media Converter -10/100 Fiber Media Converter SC/MM 1310nm 2Km	$ 68.88each
	Multimode Fiber Optic Media Converter ATS102504 Fiber Optic Media Converter	Multimode Fiber Optic Media Converter-10/100 Fiber Media Converter ST/MM 1310nm 2Km	$68.88each
	Multimode Fiber Optic Media Converter ATS102505 Fiber Optc Media Converter	Multimode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/MM 1310nm 2Km	$82.88each
Singlemode Fiber Optic Media Converters	American Data Supply Part Number	SINGLEMODE Fiber Optic Media Converter Description	Price
	Singlemode Fiber Optic Media Converter ATS102506 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter- SC/SM 1310nm 15Km	$88.88each
	Singlemode Fiber Optic Media Converter ATS102507 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter SC/SM 1310nm 30Km	$95.88ea
	Singlemode Fiber Optic Media Converter ATS102508 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter SC/SM 1310nm 40Km	$99.88 ea
	Singlemode Fiber Optic Media Converter ATS102509 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Singlemode Media Converter ST/SM 1310nm 15Km	$ 88.88 ea
	Singlemode Fiber Optic Media Converter ATS102510 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter ST/SM 1310nm 30Km	$99.88 ea
	Singlemode Fiber Optic Media Converter ATS102511 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Media Converter ST/SM 1310nm 40Km	$99.88 ea
	Singlemode Fiber Optic Media Converter ATS102512 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/SM 1310nm 15Km	$ 109.88 ea
	Singlemode Fiber Optic Media Converter ATS102513 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/SM 1310nm 30Km	$ 120.88ea
	Singlemode Fiber Optic Media Converter ATS102514 Fiber Optic Media Converter	Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter LC/SM 1310nm 40Km	$ 125.88
	Multimode/Singlemode Fiber Optic Media Converter ATS102514 Fiber Optic Media Converter	Multimode/ Singlemode Fiber Optic Media Converter-Gigabit Fiber Optic Media Converter- SC-MM/850nm to SC-SM/1310	$ 248.88ea

 

TC Communications TC Fiber Media Converters -IMC Fiber Converters IMC-Milan-Transition Networks Fiber Optic Media Converters-Transition Networks-Signamax Fiber Optic Media Converters- Signamax-Allied Telesyn Fiber Optic Media Converters

 

Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert a wide variety of data — from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems. Signamax Fiber Optic Media Converters

Redundant Gigabit Industrial Ethernet Fiber Optic Switch
(Model TC3820)-The TC3820 is frequently used to interconnect Remote Programmable Logic Controllers (PLCs) in high bandwidth applications, such as interconnecting traffic control video cameras, that require multiple channels and the reliability of a Self-healing Ring Topology

How A Fiber Optic Media Converter Works

14 Port Stand Alone Media Converter or 16 Port Rack Mount Media Converter Rack

American Data Supply stocks and carries a complete line of singlemode and multimode media converters fro 10/100 speeds to 10/100/1000 managed and unmanaged media converters.These include standalone media converters, rack mount media converters, ethernet converters, ATM OC3 fiber converters, T1/E1 Fiber Converters, DS3/E3 fiber converters from several manufacturers ranging from MRV fiber media converters, Signamax media converters, Transition Networks fiber media networks, TC Communication fiber optic media converters, and you can always save with our economical low cost line of fiber optic media converters(BELOW)

Fiber Optic Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Fiber Optic Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocol.Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Fiber Optic Media Converter will automatically sense which mode is in operation.

TC Communications Fiber Optic Media Converters- TC Fiber Media Converters - The TC3300R/S is typically used to interconnect 10/100/1000Mbps switching hubs, workstations or any other Ethernet, Fast Ethernet and Gigabit Ethernet compliant device at distances up to 100km.

Transition Networks Fiber Optic Media Converters-Transition Networks-10/100/1000 media converter that converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually. Fiber interface runs at 1000Base speeds, which enables users to connect Gigabit ports on fiber switches. Fiber connectivity options include SX optics and LX dual fiber with distances up to 125km or single fiber up to 40km. In addition to the standard 220 meters with standard SX optics, Transition Networks also offers a proprietary solution that will allow users to transmit up to 2km over multimode fiber (62.5/125µm) (xGFEB1024-100

Milan Media Converters- Milan-By utilizing lower cost 850nm optio-electronics, the 10/100BASE-SX fiber optic media converter provides compatibility with legacy 10BASE-FL devices while providing the lowest possible cost solution for fiber installation of up to 60 meters (100BASE-SX). This makes it ideal for building backbone and horizontal cabling applications where cost and 10/100 auto-negotiation are critical.

Signamax Fiber Optic Media Converters- Signamax-Signamax provides fiber optic media converter solutions that support data, voice, video and image transport over a wide variety of fiber optic and ethernet (other) transmission media. These fiber optic media converters convert a wide variety of data — from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems.

The MRV MC102 product line encompasses copper-to-fiber and fiber-to-fiber conversion units. On all of these converters, the fiber port(s) allow a choice of multimode or single mode fiber, single fiber operation, different wavelengths and power levels. EM316xSF - Single Fiber Media Converters MRV's Fiber Driver® family’s Single Fiber modules use unique technologies, which provide the ability to combine transmit (TX) and receive (RX) signals onto a single fiber strand. This effectively doubles the available fiber in a network, and eliminates the need for additional fiber installation. The Fiber Driver Single Fiber modules employs Single wavelength bi-directional technology in order to combine the TX and RX on the single strand.

IMC Fiber Optic Media Converter Converters IMC- The rugged McBasic copper-to-fiber Media Converters support all Ethernet protocols, making them ideal for all types of conversions and network extensions inside or outside the LAN.  The McBasic series includes various cabling troubleshooting features such as LinkLoss and FiberAlert, plus an internal power supply

Allied Telesyn Fiber Optic Media Converters - Coming soon-

How a fiber optic media converter works: In recent years it has become apparent that fiber-optics are steadily replacing copper wire as an appropriate means of communication signal transmission. They span the long distances between local phone systems as well as providing the backbone for many network systems. Other system users include cable television services, university campuses, office buildings, industrial plants, and electric utility companies. This is an overview of fiber-optic technology, telecommunication applications, fiber-optic advantages and disadvantages, and fiber-optic economics.

A fiber-optic system is similar to the copper wire system that fiber-optics is replacing. The difference is that fiber-optics use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information down copper lines. Looking at the components in a fiber-optic chain will give a better understanding of how the system works in conjunction with wire based systems.

At one end of the system is a transmitter. This is the place of origin for information coming on to fiber-optic lines. The transmitter accepts coded electronic pulse information coming from copper wire. It then processes and translates that information into equivalently coded light pulses. A light-emitting diode (LED) or an injection-laser diode (ILD) can be used for generating the light pulses. Using a lens, the light pulses are funneled into the fiber-optic medium where they transmit themselves down the line.Light pulses move easily down the fiber-optic line because of a principle known as total internal reflection. "This principle of total internal reflection states that when the angle of incidence exceeds a critical value, light cannot get out of the glass; instead, the light bounces back in. When this principle is applied to the construction of the fiber-optic strand, it is possible to transmit information down fiber lines in the form of light pulses.There are generally five elements that make up the construction of a fiber-optic strand, or cable: the optic core, optic cladding, a buffer material, a strength material and the outer jacket (Fig. 1). The optic core is the light carrying element at the center of the optical fiber. It is commonly made from a combination of silica and germania. Surrounding the core is the optic cladding made of pure silica . It is this combination that makes the principle of total internal reflection possible. The difference in materials used in the making of the core and the cladding creates an extremely reflective surface at the point in which they interface. Light pulses entering the fiber core reflect off the core/cladding interface and thus remain within the core as they move down the line.

Generic Fiber Optic Media Converters- Save Hundreds of Dollars With Our Quality Media Converters

Low Cost Generic Fiber Optic Media Converters 100 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode2Km to Single Mode 20Km) - 10 Slot Rack Chassis With Simplex Power Supply, Designed to Work With 10 of the CXL32, CXL-B3, CXL-G2, CXL-BG, and CXL-C Series Media Converters.- Gigabit Media Converter,Ethernet 1000Mbps (BIDI) Bi-Directional, 20Km, Single Mode, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber), With Support Web Function, For Use With CXL-1600

IMC Networks Media Converters- Network managers worldwide rely on the MediaConverter series when converting twisted pair cabling to fiber optics. The modular MediaConverter series is the most cost-effective, flexible solution for everyday fiber networking in the LAN, campus network, outside plant and MAN applications. Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic MEdia Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

Signamax Fiber Optic Media Converters- Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert a wide variety of data — from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems. Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

Managed Media Converters Chassis System

18-Bay Rack Mount Managed Media Converter Chassis System - Fiber Optic Media Converter System
10/100 To 100FX Managed Converters - 10/100 Managed Fiber Optic Media Converters
10/100 To 100FX Single Fiber WDM Managed Converters - 10/100 WDM Fiber Optic Media Converters
100FX Singlemode To Multimode Managed Converters -100 FX Fiber Optic Media Converters
ATM Singlemode To Multimode Managed Converters - ATM Fiber Optic Media Converters
1000LX To 1000SX/LX Managed Converters - 1000 LX Fiber Optic Media Converters

Stand Alone Managed Media Converters

10/100 To 100FX Managed Stand Alone Converters- 10/100 managed Stand Alone Fiber Optic Media Converters
10/100 To 100FX Single Fiber WMD Managed Stand Alone Converters - 10/100 FX Fiber Optic Media Converters
10/100/1000 To 1000SX/LX Managed Media Converters - 10/100/1000 SX/LX Fiber Optic Media Converters

Unmanaged Media Converters

10/100 To 100FX Converters With Link Fault Signaling (LFS) - 10/100 FX Fiber Optic Media Converters
10/100 To 100FX Converters With Link Fault Signaling & USB Port 10/100 Link Fault Fiber Optic Media Converters
10/100 To 100FX Mini Converters - 10/100 FX Mini Fiber Optic Media Converters
10/100 To 100FX PCI Based Converters - 10/100 FX PCI Media Converters
10/100 To 100FX Single Fiber WDM Converters With LFS 10/100FX WDM Media Converters
10/100 To 100FX PoE Converters - 10/100 FX POE Fiber Optic Media Converters
10/100/1000 To 1000SX/LX Converters - 10/100/1000 SX/LX Converters
Gigabit Ethernet Media Converters - Gigabit Ethernet Media Converters
100BaseTX To 100BaseFX Converters - 100 Base TX FX Fiber Optic Media Converters
10BaseT To 10BaseFL Converters 10 Base T Fiber Optic Converters
10BaseT To 10Base2 Converter - 10 Base T 10Base 2 Fiber Optic Converters
100FX Singlemode To Multimode Converters 100FX Fiber Optic Converters
ATM Singlemode to Multimode Converters - ATM Fiber Optic Converters
16-Bay Rack Mount Media Converter Chassis 16 Bay Fiber Optic Media Converters- 16 Bay Rack Mount Fiber Optic Converters
12-Channel Rack Mount Fiber Optic Media Converters - 12 Channel Rack Mount Fiber Optic Converters

Industrial DIN-Rail Mount Hardened Media Converters

10/100 To 100FX DIN-Rail Mount Hardened Converters- 10/100 DIN Rail Fiber Optic Converters
10/100 To 100FX WDM DIN-Rail Mount Hardened Converters 10/100 WDM Rail Mount Fiber Converters

TC Communications Fiber Optic Media Converters-Complete Selection Of Telephone Extenders-Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

Milan Media Converters- Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic MEdia Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

Transition Media Converters -Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters

Type	Part Number	Description
Fiber Optic Media Converter	ATSCXL-32M1-2	Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 2KM, SC Connector (Multi-Mode)
Fiber Optic Media Converter	ATSCXL-32M2-2	Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 2KM, ST Connector (Multi-Mode)
Fiber Optic Media Converter	ATSCXL-32S1-20	Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 20KM, SC Connector (Single-Mode)
Fiber Optic Media Converter	ATSCXL-32S1-40	Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 40KM, SC Connector (Single-Mode)
Fiber Optic Media Converter	ATSCXL-32S1-60	Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 60KM, SC Connector (Single-Mode)
Fiber Optic Media Converter	ATSCXL-32S1-100	Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 100KM, SC Connector (Single-Mode)
Fiber Optic Media Converter	ATSCXL-LFPSC-M2	Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 2KM, SC Connector, with LFP Function (Multi-Mode)
Fiber Optic Media Converter	ATSCXL-B32S1-20	Fiber Optic Media Converter 10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1310nm Rx:1550nm over One Fiber)
Fiber Optic Media Converter	ATSCXL-B33S1-20	Fiber Optic Media Converter 10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1550nm Rx:1310nm over One Fiber)
Fiber Optic Media Converter	ATSCXL-MTS1121-20	Fiber Optic Media Converter 100 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 20Km)
Fiber Optic Media Converter	ATSCXL-MTS1121-40	Fiber Optic Media Converter 101 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 40Km)
Fiber Optic Media Converter	ATSCXL-MTS1121-60	Fiber Optic Media Converter 102 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 60Km)
Fiber Optic Media Converter	ATSCXL-G2M1-550	Fiber Optic Media Converter Gigabit Ethernet 1000Mbps Media Converter, 500m, SC Connector (Multi-Mode)
Fiber Optic Media Converter	ATSCXL-G2S1-10	Fiber Optic Media Converter Gigabit Ethernet 1000Mbps Media Converter, 10Km, SC Connector (Single-Mode)
Fiber Optic Media Converter	ATSCXL-BG2S1-10	Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber)
Fiber Optic Media Converter	ATSCXL-BG3S1-10	Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber)
Fiber Optic Media Converter	ATSCXL-BG2S1-20	Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber)
Fiber Optic Media Converter	ATSCXL-BG3S1-20	Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber)

Our Cat 6 patch cords exceptional bandwidth capabilities may allow Gigabit Ethernet operation without complex DSP (Digital Signal

Unmanaged Media Converters

Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling (LFS) provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model.

The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance.  Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections.

KEY FEATURES

·    Built-In Twisted-Pair Port 10/100 Switch

·    Auto-Negotiation RJ-45 Connector with Auto-MDIX

·    SC, ST, MT-RJ, VF-45 or SC Connector

·    LEDs for Functions, Links & Activity

·    Link Fault Signaling For Use With Managed

Switches

·    1,024 MAC Address Capacity

·    Store-and-Forward Architecture

·    Full and Half Duplex Operation

·    Singlemode Spans up to 75 Km

·    Wall or Chassis Mountable

·    IEEE 802.3 and IEEE 802.3u Compliant

·    Lifetime Performance Warranty

ORDERING INFORMATION

Part Number	Description
Multimode Converters
065-1100	10/100 to 100FX MM/ST, 2 km Converter w/Link Fault Signaling
065-1110	10/100 to 100FX MM/SC, 2 km Converter w/Link Fault Signaling
065-1170	10/100 to 100FX MM/VF-45, 2 km Converter w/Link Fault Signaling
065-1172	10/100 to 100FX MM/MT-RJ, 2 km Converter w/Link Fault Signaling
065-1174	10/100 to 100FX MM/LC, 2 km Converter w/Link Fault Signaling
Singlemode Converters
065-1120	10/100 to 100FX SM/SC, 15 km Converter w/Link Fault Signaling
065-1120ED	10/100 to 100FX SM/SC, 40 km Converter w/Link Fault Signaling
065-1120XLD	10/100 to 100FX SM/SC, 75 km Converter w/Link Fault Signaling
DIN Rail Mounting Brackets
065-11DINMT	DIN Rail mounts bracket for 065-11xx series media converters

SPECIFICATIONS

·    APPLICABLE STANDARDS

IEEE 802.3 10BaseT

IEEE 802.3u 100BaseTX

IEEE 802.3u 100BaseFX

·    FIXED PORTS

Models: 065-1100/1110/1170/1172/1174/1120/1120ES

1120XLD

1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.3u 100BaseTX standard specifications; Category 5 or better cable, 100 meters maximum distance for 100BaseTX, Category 3 or better cable, 100 meters maximum distance for 10BaseT

plus

1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 62.5/125 or 50/125 micron multimode fiber optic cable, 2,000 meters maximum distance

or

1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 9/125 micron singlemode fiber optic cable, spanning: 15 kilometers maximum distance (Model 065-1120)

or

40 kilometers maximum distance (Model 065-1120ED)

or

75 kilometers maximum distance (Model 065-1120XLD)

·    LED INDICATORS

Per Unit: Power status, RJ-45 port speed

Per Port: LNK/ACT, FDX/COL

Six LEDs total

·    PERFORMANCE

Latency: < 4.2 µs (LIFO)

Throughput @ 100Base: 148,809 pps (64-byte packets)

Speed: 

100BaseTX: 100/200 Mbps for half/full duplex

10BaseT: 10/20 Mbps for half/full duplex

Switching Method: Store-and-Forward

Maximum MAC Addresses: 1,024 entries

Memory: 256 KB

·    FIBER INTERFACE, MULTIMODE MODELS

Type: LED

Wavelength: 1300 nm nominal (1270 nm maximum, 1380 nm minimum)

Maximum Output Power: - 14.0 dBm

Minimum Output Power: - 20.0 dBm

Sensitivity: -33.0 dBm

Maximum Input Power: - 8.0 dBm

Link Power Budget: 13.0 dB

·    FIBER INTERFACE, SINGLEMODE PN 065-1120

Type: MQW Laser

Wavelength: 1300 nm nominal (1260 nm maximum, 1360 nm minimum)

Maximum Output Power: - 7.0 dBm

Minimum Output Power: - 15.0 dBm

Sensitivity: -34.0 dBm

Maximum Input Power: - 7.0 dBm

Link Power Budget: 19.0 dB

·    FIBER INTERFACE, SINGLEMODE PN 065-1120ED

Type: MQW Laser

Wavelength: 1300 nm nominal (1261 nm maximum, 1360 nm minimum)

Maximum Output Power: - 5.0 dBm

Minimum Output Power: - 12.0 dBm

Sensitivity: -35.0 dBm

Maximum Input Power: - 5.0 dBm

Link Power Budget: 23.0 dB

·    FIBER INTERFACE, SINGLEMODE PN 065-1120XLD

Type: MQW Laser

Wavelength: 1300 nm nominal (1270 nm maximum, 1350 nm minimum)

Maximum Output Power: + 3.0 dBm

Minimum Output Power: - 3.0 dBm

Sensitivity: -37.0 dBm

Maximum Input Power: - 0.0 dBm

Link Power Budget: 34.0 dB

·    PHYSICAL CHARACTERISTICS

Case dimensions: 4.33"L x 3.19"W x 0.91"H

 (110mm x 81mm x 23mm)

Fiber connector protrusion varies with model.

Weight: 0.33 pounds (150 grams)

·    ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)

Storage Temperature: -13°F ~ 158°F (-25°C ~ 70°C)

Relative Humidity: 10 ~ 90%, non-condensing

·    POWER

External power adapter: 12 Volts DC; 600 mA

Power Consumption: 5 Watts Maximum

·    EMISSIONS

FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark

·    SAFETY

UL Listed

·    WARRANTY

Lifetime

 

More Fiber Optic Converters below

MRV Communications’ Small Form-Factor Pluggable (SFP) transceivers

MC102Fx - 10/100Base-TX to 100Base-FX Converters MRV Fiber Optic Media More Fiber Optic Media ConvertersClick The MC102 fiber optic media converter product line encompasses copper-to-fiber and fiber-to-fiber conversion units. On all of these fiber optic media converters, the fiber port(s) allow a choice of multimode or single mode fiber, single fiber operation, different wavelengths and power levels.The MC102F/x products are 10/100BaseTX to 100BaseFX converters, providing external power supply (MC102F/x) and internal power supply (MC102FI/x) options. These converters use switching technology for the media conversion, which provides the necessary packet buffering and error filtering, forwarding packets up to 1522 bytes. The copper port on the fiber optic media converter allows auto-negotiation or can be forced to work at 10Mbps or 100Mbps via a hardware switch.

Fiber optic Question and Answer:

What are Media Converters
Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocols.

More about Media Converters
Since a media converter is a physical layer networking device, it:

• simply converts data from one medium to another on a bit-by-bit basis
• doesn't look at addresses or other data
• doesn't recognize or react to collisions

Therefore a media converter is different from a bridge, a switch, or a repeater.

A stand alone media converter is a small device with two media-dependent interfaces and a power supply. It can be installed almost anywhere in a network. The style of connector depends on the selection of media to be converted by the unit. In a Fast Ethernet environment, a 100Base-TX to 100Base-FX Media Converter connects a 100Base-TX twisted-pair device to a 100Base-FX compliant single or multimode fiber port that has a fiber-optic connector. In a Gigabit Ethernet, a Media Converter is commonly deployed to convert multimode to single-mode fiber.

Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Media Converter will automatically sense which mode is in operation.

EM316x - Copper to Fiber Media Converters

Fiber Driver® copper to fiber media converter modules from MRV make it easy to merge legacy copper network elements with new or existing fiber optic infrastructure, allowing LAN communications to be extended to distances of up to 130 km or more. In addition, the Multimode Extender (MX) technology found in select Fiber Driver products breaks the transmission barrier of multimode fiber with link distances of up to 10 km.

Copper to multimode and copper to single mode solutions are available for Ethernet, Fast Ethernet, Gigabit Ethernet and Copper Gigabit Ethernet, OC-3/STM-1, DS3 and E3. (Additional Ethernet copper to fiber solution are provided by our signal repeater and switch modules.

EM316x - Multimode to Singlemode Media Converters

The Fiber Driver® collection of Multimode to Single Mode converters allow network managers to connect between Multimode and Single Mode fiber. Conversion to Single Mode fiber can extend the transmission distance to over 100 km. Protocols covered by this group of modules include SONET OC-3 and Gigabit Ethernet.

Multimode to Single Fiber Single Mode modules can be found in the group of Single Fiber modules.

E1/T1 Fiber Modems

The EM316T1 and the EM316E1 modules of the Fiber Driver® family are designed to extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps) traffic. These units convert the electrical signals to optical signals and transmit them over distances of up to 10 km on Multimode fiber, or distances of up to 100 km on Singlemode fiber. The EM316T1 and EM316E1 are transparent to the framing format, and support AMI or B8ZS (T1) and HDB3 (E1) line codes, respectively. They include an internal elastic buffer to remove jitter from the transmitted data. Six LED indicators aid in monitoring and trouble-shooting this module. A management agent is incorporated on the module to enable management in conjunction with the Fiber Driver EM316NM management card. As part of the Fiber Driver family, the EM316T1 and EM316E1 modules fit in all Fiber Driver chassis types, support local and remote loopback tests, and can be used to interconnect between any T1 or E1 devices. Among the types of T1/E1 devices that can be connected by these modules are PBXs, multiplexers, video CODECS, routers, network servers, and ATM/frame relay switches. Benefits include extended distances, improved quality of transmission, better security, remote management capability, and high density.

The MC102FR is a 100BaseFX repeater, targeted for fiber media conversion (MM to SM), and used for infrastructure adaptation. It is also used for long distance communications, via repeater chaining. Since the MC102FR performs 3R (retiming, reshaping, re-amplification) signal regeneration, units may be placed one after another without compromising signal quality.

The MC102FRC is a 100BaseTX to 100BaseFX repeater, targeted for applications requiring long frames (more than 1522 bytes), such as those used by MPLS encapsulation. The MC102FRC also provides an Automatic Link Integrity (ALI) feature, which automatically shuts down the copper link in case of fiber link failure.

MC102T Fiber Optic Media Converter protocol transparent media converters provide media adaptation signal regeneration up to 100Km for any protocol. Two types of converters are available, for protocols up to 200Mbps rates (FE, STM1, ESCON, E3, etc.) and up to 1.25Gbps (GE, FC, STM4).

The MC102G Fiber Optic Media Converter products are 1Gbps signal repeaters for Ethernet or Fiber Channel (1Gbps) applications. The MC102G units provide fiber-to-fiber conversion (MM to SM) for infrastructure adaptation. Additionally, since the MC102G provides 3R signal regeneration, networks built by chaining these units can reach distances longer than 100Km without compromising signal quality.

MS104 - Unmanaged 4-Port Ethernet Fiber Optic Switches

The MS104 products are 4-port switches, which are targeted for SOHO, FTTH, and other applications where a few 10/100BaseTX devices need to be concentrated and connected to the network by fiber connections. The family members differ from each other by the type of fiber optic ports connection they accommodate, with a choice of multimode fiber, singlemode fiber, single fiber operation, different wavelengths and power levels as well as different connector types (DSC, SC and MTRJ).

MS105 - Unmanaged 5-Port Ethernet Fiber Optic Switches

The MS105 products are 5-port switches, which are targeted for SOHO, FTTH, and other applications where a few 10/100BaseTX devices need to be concentrated and connected to the network by fiber connections. The family members differ from each other by the type of fiber optic ports connection they accommodate, with a choice of multimode fiber, singlemode fiber, single fiber operation, different wavelengths and power levels as well as different connector types (DSC, SC and MTRJ).

MM04 - 4-Port E1 Fiber Optic Media Multiplexer

The MM04 product line is a 4 port E1 or T1 multiplexer/demultiplexer that transmits over a fiber optic link. The products are standalone (1U), 19" rack mountable (half-size devices). The optical fiber interface is available in a number of standard fiber connections and has optional redundant optical connections. The chassis is available with universal AC power supply (100-240v) or DC power supply (36-60v) and and in option of redundant power supply.

MM04 devices support four (4) link interfaces and are available for E1 or T1 configurations with connections for RJ-48 (E1/T1 balanced). In long haul mode the interfaces possess usable receive sensitivity of 0 dB to -43 dB for E1 and 0 dB to -36 dB for T1 which allow the device to operate with 0.63 mm (22AWG) cables at distances up to 2.5 km (E1) and 6000 feet (T1).

Each E1/T1 port is designed to meet regulatory compliant solutions such as for circuit protection against surges and AC lightning, which is essential for long haul E1/T1 lines

MM04 - 4-Port T1 Fiber Optic Media Multiplexer

The MM04 product line is a 4 port E1 or T1 multiplexer/demultiplexer that transmits over a fiber optic link. The products are standalone (1U), 19" rack mountable (half-size devices). The optical fiber interface is available in a number of standard fiber connections and has optional redundant optical connections. The chassis is available with universal AC power supply (100-240v) or DC power supply (36-60v) and and in option of redundant power supply.

MM04 devices support four (4) link interfaces and are available for E1 or T1 configurations with connections for RJ-48 (E1/T1 balanced). In long haul mode the interfaces possess usable receive sensitivity of 0 dB to -43 dB for E1 and 0 dB to -36 dB for T1 which allow the device to operate with 0.63 mm (22AWG) cables at distances up to 2.5 km (E1) and 6000 feet (T1).

EM316GMX - Gigabit Multimode Extenders

The Fiber Driver® Gigabit Multimode Extender applies unique technology that allows the transmission of high-speed signals over Multimode fibers to distances much longer than the standard. This allows the use of high-speed backbone protocols over fiber that was originally used for FDDI.

Fiber optic cables for FDDI applications were typically laid in 2 km increments, since that was the distance limit for FDDI and Fast Ethernet on Multimode fiber. But with today's new high-speed backbone protocols, Multimode fiber's physical characteristics result in a maximum distance of 550 meters,.

The Fiber Driver Gigabit Multimode Extender offes a solution that is interoperable with all standard Gigabit Ethernet equipment. It carries Gigabit Ethernet data on existing Multimode fiber (FDDI graded) to distances of up to 2 km guaranteed. Depending on the quality of the fiber, links of up to 6 km are possible.

Optical Protection Switch-EM316OSSH

The Fiber Driver® Optical Protection Switch from MRV (model number EM316OSSH) makes creating a redundant optical link easier and more affordable than ever before. Designed to provide full path protection for mission critical networks, the module is capable of automatically switching between a primary and secondary (backup) link in 10 ms or less in the event of a fiber cut or transponder failure.

As an all optical device performing no optical-electrical-optical (OEO) conversion, the EM316OSSH remains protocol independent and accepts all wavelengths from 1260 nm to 1630 nm, making it suitable for virtually any application, including WDM path protection. The module can provide 1+1 protection in resilient point-to-point or Optical Unidirectional Path Switched Ring (O-UPSR) deployments.

EM316-xSW - 10/100 Ethernet Switches

The Fiber Driver® family includes three types of switch modules: three-, four-, and six-port Ethernet/Fast Ethernet switches. Switch modules are used to link between 10Mbps and 100Mbps or Half to Full Duplex mode. Switch modules offer a combination of 10/100Base-TX ports and 100Base-FX ports. They separate between Ethernet collision domains and filter local traffic from propagating to the rest of the network.

EM316xSF - Single Fiber Media Converters

The Fiber Driver® family’s Single Fiber modules use unique technologies, which provide the ability to combine transmit (TX) and receive (RX) signals onto a single fiber strand. This effectively doubles the available fiber in a network, and eliminates the need for additional fiber installation. The Fiber Driver Single Fiber modules employs Single wavelength bi-directional technology in order to combine the TX and RX on the single strand.

EM316SC & PASCLCAS - Splitter/Combiner

Splitter/Combiner technology provides the ability to propagate two signals, transmit (TX) and receive (RX), over a single fiber strand using the same wavelength. The Fiber Driver® Splitter/Combiner modules, and Splitter/Combiner cables for GBICs and SFPs effectively double the availability of fiber in a network. They are fully passive devices that operate at a specific wavelength, and remain protocol and network transparent.

A pair of Splitter/Combiners add a power loss of only up to 7 dB for SM fiber and 9 dB for MM fiber. Angled Polished Connectors (APCs) are used at the link connections to eliminate cross-talk.

EM316E1MUX4 - E1 Fiber Multiplexers

The Fiber Driver® E1 Fiber Multiplexer from MRV Communications transmits four E1 data channels across a fiber optic trunk in a Point-to-Point (PtP) configuration. Each line interface consists of a HDB3 encoder/decoder, and a receiver with equalizer for reliable data and clock recovery. The device also includes a crystal-less jitter attenuator which, depending on system requirements, can be set in the transmit (TX) or receive (RX) path. Line distances from 0 to 100m are supported. Line protection is designed to meet Telecordia GR-1089 standards. The Fiber Driver E1 Fiber Mux is G.703 interface and G.704 framing compliant.

EM316T1MUX4 - T1 Fiber Multiplexers

The Fiber Driver® T1 Fiber Multiplexer from MRV Communications transmits four T1 data channels across a fiber optic trunk in a Point-to-Point (PtP) configuration. Each line interface consists of a B8ZS, or AMI encoder/decoder as applicable, and a receiver with equalizer for reliable data and clock recovery. The device also includes a crystal-less jitter attenuator which, depending on system requirements, can be set in the transmit (TX) or receive (RX) path. Line distances from 0 to 100 m are supported. Line protection is designed to meet Telecordia GR-1089.

WDM22
E1 / T1 & Fast/Gigabit Ethernet over a Single Fiber

Combining Fiber Driver® WDM and Splitter/Combiner technology, the E1 and T1 WDM22 modules combine separate voice and data channels onto a single strand of fiber. The EM316FE1SF and EM316GE1SF models merge E1 (2.048Mbs) and Ethernet (100 Mbps and 1000 Mbps respectively), while the EM316FT1SF and EM316GT1SF combine T1 (1.544Mbs) and Ethernet (100 Mbps or 1000 Mbps). The units effectively quadruple available fiber capacity. What would normally require separate dual-fiber links, one for an E1/T1 connection and one for an Ethernet connection, instead takes only a single strand of fiber.

E1/T1 Fiber Modems

The EM316T1 and the EM316E1 modules of the Fiber Driver® family are designed to extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps) traffic. These units convert the electrical signals to optical signals and transmit them over distances of up to 10 km on Multimode fiber, or distances of up to 100 km on Singlemode fiber. The EM316T1 and EM316E1 are transparent to the framing format, and support AMI or B8ZS (T1) and HDB3 (E1) line codes, respectively

EM316PAMULC, EM316WP, PAWLCSC - Passive Mux/Demux
2-, 4- and 8-channel modules, and 2-channel cables

The Fiber Driver® Passive Mux/Demux module and cables deliver the benefits of a Wave Division Multiplexer in a fully passive solution. With matching units placed at each end of an optical link, 2 or more Full Duplex data channels can be combined and transmitted over a Single Mode fiber trunk.