Wireless Supplier, Pendulum, 38-2072, Analyze-R T Model 2261A Spectrum Monitor / Analyzer, Wireless Backhaul, Wireless Solutions, National Wireless Rollouts, Bluetooth , Wi Fi, Wi Fi Solutions, Wireless Integration

Experts in Time & Frequency Calibration, Measurement and Analysis

Part No.	Description
38-2072	Analyze-R ™ Model 2261A Spectrum Monitor / Analyzer
38-2080	Dual Band Rubber Duck 2.4/5GHz for use with Model 2261 Spectrum Monitor / Analyzer
38-2091	Optional Total Channel Power

Analyze-R™ : Spectrum Monitor / Analyzer

with 'Unattended Data Recording' and automatic 'C/I' calculation

The Analyze-R™ , model 2261A, is an affordable, easy-to-use, application-specific Spectrum Monitor/Analyzer that addresses the 900 MHz & 2.4 GHz unlicensed ISM bands; the 3.4–3.6 GHz licensed/unlicensed bands; the 4.9 GHz Public Safety band; the unlicensed 5 GHz U-NII / ISM bands, and the 5.8 GHz DSCR band. The Analyze-R™ is designed for non-technical personnel doing on-site spectrum monitoring and analysis, surveying, installing, maintaining, and troubleshooting of the latest wireless communication systems. The Analyze-R™ contains a data logger, with an embedded GPS receiver and GPS-disciplined real-time clock, for recording displayed data. This unique instrument is designed for field use, is a fraction of the cost of a full-featured general-purpose spectrum analyzer, more sensitive, and far easier to use!

Features:

Wideband receiver for spread-spectrum signal power measurement and potential interference identification
Truly Portable:

Battery-Powered, 5–6 hrs. operating time,
3 hours recharge
Light Weight (<7 lbs.) including Battery & Back-Pack

LCD display showing entire band spectrum (1 MHz resolution) with tuneable marker showing frequency and power (peak hold or average).
38 Selectable 100 MHz-wide Bands: 900 MHz; 2.4 GHz (ISM); 3.4–4.2 GHz; 4.9 GHz (Public Safety); 5–6 GHz (U-NII/ISM/DSCR).
Bands can be swept for power analysis or set to a specific frequency for antenna alignment.
Logged data includes: longitude, latitude, received signal level power across band (in 1-MHz steps), date/time, and unit’s model number & serial number. Multiple sweeps may be stored for later download.
Unattended Data Recording can now be programmed into the instrument for making measurements at a remote location without personnel being on site.
C/I (Carrier to Interference) figure, in dBm, can be automatically calculated to confirm sufficent fade margin for expected link availability. This is the most important link measurement you can make to analyze and resolve multipath and interference issues
Total Channel Power - this option provides front panel observation and calculation of "Total Channel Power' with a user defined frequency in Realtime.

cable, vdsl, patch